Overview
The Rigid Industries 3-Wire Light Wire Harness, part number 40188, is a 7.5′ harness that connects a single Hi/Lo LED light to a 12V electrical system. Battery terminals sit on one end and a Deutsch connector sits on the other.
It includes an inline fuse holder and a waterproof switch. It is built for several D2, E2, SR2 and SRQ2 Hi/Lo lights.
Key features
- Battery terminals on one end and a Deutsch connector on the other
- Inline fuse holder
- Waterproof switch
- Compatible with D2 H/L (Single), 4′-10″ E2 H/L, 6″ and 10″ SR2 H/L, and SRQ2 H/L lights
Hi/Lo light wiring basics
A Hi/Lo light uses separate high and low inputs, so the switch and wire have to match that arrangement. Confirm which input your light uses and that the harness terminates at the right point before connecting power. Crossing the leads can damage the light or leave it stuck on one setting.
Mount the switch where it is easy to reach and protected from spray. Route the power leads away from moving parts and keep the ground connection short and clean. Check the seals on the switch and the light after each season, because moisture at the connections is the most common cause of intermittent operation.
- Match the switch to the light’s Hi/Lo inputs
- Keep the switch protected from spray
- Keep the ground connection short and clean
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40188 |
| UPC | 849774011597 |
| Length | 7.5′ |
| Light type | Hi/Lo LED |
| Electrical system | 12V |
| Connector | Deutsch |
| Components | Inline fuse holder, waterproof switch |
| Fitment | Universal Fit |
Vehicle fitment
The harness is universal and not vehicle-specific. Confirm that your Rigid light matches one of the compatible models listed above before wiring it, since the harness is built for Hi/Lo lights in that list.
Installation notes
Keep the inline fuse holder close to the battery, and check your local road-use rules before fitting the light. Route the 7.5′ harness from the battery terminals to the light.
What’s included
Harness with inline fuse holder and waterproof switch.
Not included: The Hi/Lo LED light, since the harness connects to a single light.









