Select your vehicle

Revtek Add-A-Leaf Kit Rear – AALT5B

Revtek

Shop Toyota Tacoma Add A Leaf on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Revtek AALT5B rear add-a-leaf kit, part number AALT5B
  • Long type, direct fit for 2005–2015 Toyota Tacoma Base, Pre Runner and TRD Pro
  • Shot-peened springs with a corrosion-resistant coating
  • Raises ride height and spring rate, per the brand

Description

Overview

The Revtek AALT5B is a long-type rear add-a-leaf kit that fits 2005 to 2015 Toyota Tacoma pickups in Base, Pre Runner and TRD Pro trims. It increases ride height and spring rate at the rear.

The springs are shot-peened and have a corrosion-resistant coating, which supports long service life. Confirm current warranty terms before buying.

Key features

  • Long-type add-a-leaf for the rear position
  • Shot-peened springs for long life
  • Corrosion-resistant finish
  • Raises ride height and spring rate

Long-type leaf kits in use

A long-type add-a-leaf extends further along the spring pack than a short unit, so it spreads extra support over more of the spring’s length. That usually gives a more even rear ride under load, though the stiffer feel is noticeable on empty trips. Shot-peened springs resist surface fatigue, which matters on trucks that see rough trail use or regular towing. Keep the rear tires at the pressure suited to the load so the truck tracks straight.

Before installing, inspect the spring pack, bushings and U-bolts for wear, since a long-type kit adds stress to those parts. Look at rear shocks and bump stops as well, because a higher rear end changes their working range. After the first several drives, check clamp torque and recheck alignment if the tires wear unevenly.

Specifications

Brand Revtek
Part number AALT5B
UPC 811323010818
Position Rear
Type Long
Fitment type Direct fit
Finish Shot-peened, corrosion-resistant coating
Warranty Limited lifetime; confirm current terms before buying.

Vehicle fitment

The manufacturer fitment list covers 2005 to 2015 Toyota Tacoma (Base, Pre Runner, TRD Pro).

Tacoma model years after 2015 and other Toyota models are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The kit is a long-type rear add-a-leaf kit. Check the hardware you receive against your installation plan before starting.

SKU: REVAALT5B Category:

Specification

Shipping weight 30.00 lbs
Package dimensions 33.00 × 4.80 × 2.80 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2015Base, Pre Runner, TRD Pro

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Revtek AALT5B fit newer Tacoma models?

No. The fitment covers 2005 to 2015 Toyota Tacoma models only, in Base, Pre Runner and TRD Pro trims. Newer Tacoma years are outside this kit's coverage, so verify your model year and trim before buying.

What does a long-type add-a-leaf do?

A long-type add-a-leaf is a longer extra leaf that runs along the spring pack. The kit raises ride height and spring rate at the rear of the truck.

Is the AALT5B covered by a warranty?

Yes. The kit carries a limited lifetime warranty. Confirm the current terms before buying, including which company stands behind the coverage.

How do I know if the rear springs need a leaf kit?

Look for a rear end that sits low under load, bottoms out over bumps, or sags after towing. A visible gap between the tire and fender at rest can also signal the springs are tired. Check the existing leaves for cracks before adding a kit.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Add A Leaf on Amazon