Select your vehicle

Replacement O-Ring Set

ARB 4x4 Accessories

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Sold as a pair
  • Fits the ARB lockers RD21, RD22, RD33, RD35, RD36 and RD64 among 23 listed models
  • Replacement O-ring set for ARB differential lockers
  • Locker model number decides which set is needed

Description

Overview

The ARB replacement O-ring set is sold as a pair and is made for ARB differential lockers. It fits 23 locker models, from the RD21 through the RD154, so the locker model number decides which set you need rather than the vehicle.

A differential locker makes both wheels on an axle turn together, which helps on loose or uneven ground. An O-ring is a rubber ring that seals the joint between two machined parts, keeping lubricant or air where it belongs. When a locker is opened for service, its O-rings are usually renewed along with the other seals.

ARB says its lockers are designed with CAD and CAM modeling and finite element analysis, with vibration, strength and crash testing. Its factory uses laser cutting, CNC bending, robot grinding and robotic welding.

Key features

  • Sold as a pair
  • Fits the ARB lockers named in the specifications
  • Replacement O-rings for ARB differential lockers
  • Covers 23 locker models from RD21 to RD154

Signs of a worn seal

Differential lockers rely on seals to keep lubricant inside the housing and dirt out of the mechanism. Over time the rubber in an O-ring can harden, crack or take a permanent set, which allows slow weeping around the joint. Oil on the outside of the cover or a lower fluid level after a trail day are common early signs. Older rubber tends to lose its grip sooner in hot climates and after repeated exposure to mud and water, so check the seals whenever the cover comes off.

When a locker is serviced, it is usually practical to replace every seal that was disturbed, along with any gasket in the same joint. Clean the mating surfaces and remove old rubber residue before fitting new rings, and avoid nicks from tools that could pinch a new seal during installation. Use the lubricant type your locker requires and fill to the correct level once the cover is back in place.

Specifications

Brand ARB 4×4 Accessories
Product type Replacement O-ring set
Quantity Sold as a pair
Compatible lockers RD21, RD22, RD33, RD35, RD36, RD64, RD65, RD66, RD95, RD96, RD97, RD98, RD99, RD111, RD121, RD131, RD132, RD135, RD141, RD142, RD152, RD153, RD154

Vehicle fitment

Fitment is set by locker model, not by vehicle. Match your locker model number to the compatible lockers above before ordering.

Installation notes

Replace the O-rings as a pair when the locker is opened. The O-ring size depends on the locker model, so confirm that model first.

What’s included

One pair of O-rings. Seal sizes vary by locker model, so confirm the count and sizes against your installation before starting.

SKU: ARB160207SP Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 5.00 × 5.00 × 5.00 in
brands

Questions & Answers

Which ARB lockers does this O-ring set fit?

It fits the ARB lockers named in the specifications, including RD21, RD22, RD33, RD35, RD36 and RD64. Check your locker model number against the full list before ordering, since fit depends on the locker rather than the vehicle.

Is it sold as one O-ring or a set?

It is sold as a pair, so each purchase supplies two O-rings. Confirm the seal sizes that match your locker model before you begin the rebuild, since sizes depend on the locker model.

Does this set cover every ARB locker?

No. It is listed only for the locker models named in the specifications, and each model has its own O-ring requirement. Check that your locker appears in the list before ordering.

How can you tell a worn O-ring from a healthy one?

Look for cracking, flattening, hardening or nicks along the ring when the locker is opened. Any of those signs means the seal should be replaced, even if the locker still engages. Replace the O-rings as a pair during service so both seal the joint evenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon