Overview
The ARB Deluxe Bull Bar 3450080 is a gloss black powder-coated winch bumper for the Jeep Cherokee XJ. It comes with the winch mount and all necessary hardware, and it accepts winches beyond the WARN units it was designed around.
This bull bar is built with computer design, laser-cut components, mandrel bending and clean welds. Each mounting system is engineered for a specific vehicle, so the bar is not a universal fit.
For the XJ, the bar adds mounting points for off-road lights and clevis or D-rings, amber driving lights, and 1-7/8 inch diameter tubing that protects the fender and grille. The powder coat is finished to a high standard, and the bar is substantial steel at roughly 90-100 pounds.
Key features
- Gloss black powder coat finish
- Integrated winch mount with all necessary hardware
- Mounting points for off-road lights and clevis or D-rings
- Amber driving lights
- 1-7/8 inch diameter tubing for fender and grille protection
- Mounting system engineered to the specific vehicle
- Steel construction with D-ring mount
Mounting lights and accessories
Auxiliary lights are one of the most common additions to a bull bar. The mounting points set where the lights sit, and the choice of light housing, beam pattern and wattage affects how much current the wiring carries. Pick lights that match the way you drive, whether that is trail work at low speed or longer runs on dusty roads.
Route the wiring through the factory openings and secure it with clips so that it stays clear of moving parts and the winch cable. Use a relay so that the lights draw power directly from the battery rather than through the switch circuit, and fuse each lead close to the battery. Check the connections after rough trips, since vibration can loosen them over time.
- Use a relay and inline fuse for each light circuit
- Keep harnesses away from the winch and fairlead
- Aim lights after mounting and recheck after rough trips
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3450080 |
| UPC | 837290001390 |
| Product type | Front bumper (bull bar) |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Gloss black powder coat |
| Tubing | 1-7/8 inch diameter, for fender and grille protection |
| Winch mount | Included, with hardware |
| Light mounts | Included |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
The XJ name refers to the 1984–2001 Jeep Cherokee, the generation this bar is built for.
Later Cherokee models such as the KL are not covered by the XJ name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch mount arrives with its own hardware, so the bar is ready for a winch once it is on the XJ.
What’s included
- Bull bar front bumper, gloss black powder coat
- Winch mount with mounting hardware
- Light mounts and D-ring mount
Not included: A winch.
















