Select your vehicle

ARB Air Locker Seal Housing O-Ring – 160246-2

ARB 4x4 Accessories

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement O-ring for the ARB Air Locker seal housing
  • Part number ARB160246-2 from ARB 4×4 Accessories
  • Helps keep the air locker seal housing sealed and working properly
  • Labeled Universal Fit, with no vehicles named

Description

Overview

The ARB Air Locker seal housing O-ring, part number 160246-2, is a replacement O-ring for ARB air-powered Air Locker differentials. Its job is to keep the seal housing sealed so the locker keeps working properly. ARB refined the seal housing to prevent leakage and later added a four-pinion differential to transfer more power where it is needed most.

The part is labeled Universal Fit, but no vehicles, years or axles are named, so match it to your ARB Air Locker before use.

Key features

  • Replacement O-ring for the Air Locker seal housing
  • Intended to keep the air locker sealed during operation
  • ARB part number ARB160246-2
  • Labeled Universal Fit

Seal care during locker service

An O-ring only works as well as the surface it sits against, so the seal housing needs to be clean and free of old rubber before the new ring goes in. Use a plastic pick rather than a metal tool to avoid scoring the groove. Lightly coat the new ring with grease suited to your locker’s seals, and seat it fully without twisting.

Air lockers depend on a sealed system to engage reliably, so a small leak at the housing can show up as slow or weak engagement. If the locker seems sluggish after a seal change, check the air line connections and the housing for leaks before assuming the locker itself has failed. Keep spare seals on hand for trips into remote areas, where a repair can take longer.

Because the seal is inside the differential, the job usually involves draining the gear oil and removing the cover. Clean the fluid and check for metal particles at the same time, since they can signal wear elsewhere in the axle.

  • Clean the groove with a plastic pick
  • Check the air lines after reassembly
  • Inspect the fluid for metal particles

Specifications

Brand ARB 4×4 Accessories
Part number 160246-2
Product type Seal housing O-ring
Fitment label Universal Fit

Vehicle fitment

This O-ring seals an ARB Air Locker, so the locker model and axle matter more than a general vehicle fit. Match it to your locker model before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Count the O-rings when the package arrives to confirm the piece count.

Questions & Answers

What is the ARB 160246-2 O-ring used for?

It is a replacement O-ring for the seal housing of an ARB Air Locker, sold under part number ARB160246-2 by ARB 4x4 Accessories. It helps keep the seal housing sealed so the locker keeps working properly.

Will this O-ring fit my vehicle?

No vehicles are named for this O-ring, and it carries a Universal Fit label. Because it seals an ARB Air Locker, confirm your locker model and axle before installing it.

How many O-rings are included?

Count the O-rings when the package arrives and confirm you have enough for the seal housing before starting. Compare the piece count with the number needed for your locker model before you begin the repair.

How can I tell the O-ring needs replacing?

Signs include air leaks at the seal housing, a locker that engages slowly, or fluid seeping near the housing. Confirm the locker model before ordering, then inspect the old ring for flattening, cuts or hardening to decide if it should be replaced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon