Overview
The ARB replacement O-ring set is sold as a pair and is made for the ARB locker RD82. Fit is set by the locker model, so confirm RD82 before ordering.
An O-ring is the rubber seal that sits between two machined surfaces and keeps lubricant or air from escaping. On a differential locker, the O-rings help keep the locker’s internal parts sealed, and they are usually replaced when the locker is opened for service. The set is a seal replacement, not a locker.
ARB engineers its lockers with CAD and CAM modeling and finite element analysis, and its products go through vibration, strength and crash testing before release.
Confirm the locker is an RD82 before ordering, since the locker model number decides which O-ring set is correct.
Key features
- Sold as a pair
- Made for the ARB locker RD82
- Replacement O-rings for the locker’s internal seals
Caring for differential locker seals
A differential locker seal works by holding its place in a machined groove while the housing is closed and filled. Over time heat, fluid exposure and repeated pressure can flatten or crack the rubber, and a damaged seal lets lubricant or air escape. Inspect the seals each time the locker is opened, even if the rest of the unit looks sound.
Clean the groove and the mating surfaces thoroughly before fitting a new seal, since any grit can pinch the new ring and cause a leak. Lightly lubricate the seal as the installation calls for, avoid stretching it over sharp edges, and seat it fully before reassembling the unit. Keep the old seal parts together so the fit can be compared.
- Clean the groove before fitting
- Replace seals together as a set
- Check for flattened or cracked rubber
- Use the correct locker model number
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Product type | Replacement O-ring set |
| Quantity | Sold as a pair |
| Compatible locker | RD82 |
Vehicle fitment
Fitment is set by locker model rather than vehicle. The set matches the RD82 locker, so confirm the locker model in the axle before ordering.
Installation notes
Because the set is sold as a pair, replace both O-rings together when the RD82 locker is opened. Confirm the locker model before fitting, since a different locker uses a different O-ring.
What’s included
One pair of O-rings, as sold for the RD82 locker.









