Overview
Part number 081901SP is an ARB replacement seal housing and O-ring kit for ARB differential lockers. It is sold as a service kit, so the seal housing and O-rings arrive together. Confirm the locker model before ordering.
Seals and O-rings wear with use, so a kit like this is usually bought when a locker’s sealing is being refreshed. The seal housing holds the seal in position, and the O-rings close the gaps where the housing meets the locker body.
ARB says its locker designs were tested with finite element analysis and that its manufacturing uses laser cutting, CNC bending and robotic spot welding, followed by powder coating and spray painting.
Because the kit is sold as a unit, the seal housing and O-rings arrive together. The part number is the reference to use when comparing kits, and the locker model should be checked against the kit before any parts are removed from the locker.
Key features
- Seal housing and O-ring kit from ARB
- Part number 081901SP
- Intended for ARB differential lockers
Seal care during service
Seals and O-rings are sensitive to dirt, heat and the way they are handled, so storage and fitting technique matter. Keep the new parts in their packaging until they are needed, and store them out of direct sunlight and away from solvents. A seal that has been dropped or stretched during handling may not seat properly, even if it looks intact.
During fitting, a little clean lubricant on the O-ring helps it slide into place without twisting. Check that each seal sits flat in its groove before closing up the locker. Once assembled, watch the joint for leaks during the first use and address any seepage promptly, since small leaks tend to grow if they are ignored.
- Store seals away from sunlight and solvents
- Check each seal sits flat in its groove
- Watch the joint for leaks during first use
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 081901SP |
| Product type | Replacement seal housing and O-ring kit |
| Application | ARB differential locker service |
Vehicle fitment
The kit is matched to the ARB locker, not to a vehicle year or model. Confirm the locker model in your axle before ordering.
Installation notes
Fit the seal housing and O-rings from this kit together when the locker is serviced. Use the parts in the kit only, and keep them together until the locker is reassembled.
What’s included
One replacement seal housing and its O-rings.









