Overview
The Pro Comp Dual Steering Stabilizer Bracket, part number 2581, is the bracket kit for mounting the ES2000 steering stabilizer shock. It is for the 2000–2005 Ford Excursion, the 1999 Ford F-250 and the 1999–2004 Ford F-250 and F-350 Super Duty.
The kit includes the bracket and mounting hardware. The stabilizer shock is a separate part.
Key features
- Bracket designed for the ES2000 steering stabilizer
- Mounting hardware included
- It is a direct fit for the vehicles covered above.
Steering stabilizer setup
A steering stabilizer damps side to side movement in the steering, which helps on rough trails and at higher speeds with larger tires. The bracket is the mounting point, so its welds, tabs and bolts carry the load every time the stabilizer works. Choose a bracket that matches your stabilizer and steering geometry.
Before fitting, inspect the mounting points on the axle and tie rod for clearance, and check that the bracket sits square without forcing it. Torque bolts evenly and recheck them after the first few drives. After rough use, recheck the bracket and shock ends for looseness or cracks.
Steering stabilizers are often replaced with tie rods, drag links and ball joints when worn, so inspect those parts when the stabilizer is being set up.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 2581 |
| UPC | 614901037050 |
| Type | Steering stabilizer bracket kit |
| Stabilizer it mounts | ES2000 |
| Included | Bracket and mounting hardware |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2005 Ford Excursion, the 1999 Ford F-250 and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty.
The fitment data does not include the Ford F-150, the Ford Ranger, or Super Duty F-250 and F-350 trucks from 2005 on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is built for the ES2000 stabilizer, so that shock is needed to finish the setup. Check the bracket against the mounting points on your truck before installing.
What’s included
The bracket and its mounting hardware.
Not included: the ES2000 steering stabilizer shock, which the bracket is made to mount.







