Overview
The RS999341 is a rear RS Coilover shock absorber from the RS9000XL Series, fitting the 1998–2004 Nissan Frontier. It has an Advanced Tri Tube Mono Flow design with 9-position adjustable valving and works with Rancho’s My Ride Manual/Remote tuning system.
Rancho has made off-road products for 50 years. This coilover is designed for performance, and it carries a limited lifetime warranty.
Key features
- Advanced Tri Tube Mono Flow design
- 9-position adjustable valving
- Compatible with My Ride Manual/Remote tuning
- Protective boot included
- Limited lifetime warranty.
Coilover setup basics
A coilover combines a shock absorber with a coil spring on one unit, so the spring rate and damping work together to control ride height and body motion. On a rear axle, that setup helps control axle movement under load and during hard braking. Because the spring is part of the assembly, a worn coilover can change how the rear end sits as well as how it rides.
Before installing, support the rear axle and remove the old unit carefully, noting how the spring sits. After installation, check the mounting bolts after the first few drives and look for oil on the body or any noise over bumps. Adjustable valving makes it easy to tune the feel, so change one setting at a time and note what you changed.
- Support the axle while the old unit is removed
- Check mounting bolts after the first few drives
- Note the valving setting before making changes
- Inspect the boot periodically for tears
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999341 |
| Shock series | RS9000XL Series |
| Position | Rear |
| Shock type | RS Coilover |
| Tube design | Advanced Tri Tube Mono Flow |
| Valving | 9-position adjustable |
| Tuning compatibility | My Ride Manual/Remote |
| Charge type | Gas charged |
| Lift/drop | 0 in. |
| Fitment type | Direct fit |
| Protective boot | Included |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1998–2004 Nissan Frontier in Base, SC, SE, SVE and XE trims. Other Nissan models are not covered.
Frontier model years before 1998 or after 2004 and trims not named above are not confirmed for this shock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rancho lists 0 in. lift/drop for this shock, so it is intended for stock ride height rather than a lift. Support the rear axle before unbolting the old unit.
What’s included
The coilover package covers the shock and its protective boot. No coil spring or mounting hardware is described.
Not included: the My Ride Manual/Remote tuning system, which the shock is compatible with.














