Overview
The Rancho RS55221 is a front shock absorber for Dodge Ram 1500, 2500 and 3500 trucks. Dodge Ram 1500 fits cover 1994 to 2001 and 2006 to 2008, while 2500 and 3500 fits run from 1994 to 2013.
Its compressed length is 14.500, extended length 23.688 and travel length 9.188, given without units. It is rated for 0 in. lift/drop.
Key features
- Designed for the front position
- Direct fit design
- Rated for 0 in. lift/drop
- Trims include Laramie, SLT, Power Wagon and TRX4 on specific entries
Front shocks on Ram trucks
Front shocks on Ram trucks control steering and body movement on rough roads and at highway speed. Because the Ram front suspension works with heavy engines and loads, worn damping can cause nose dive under braking and a loose feel when turning. Good damping also helps tires stay in contact with the road.
When choosing a front shock, match the year, model and trim, since the Ram range is broad. Check the mounting points against the old shock, and inspect the upper mount and bushings during installation. Lift and tire changes can alter how a front shock works, so review the suspension setup before buying. After replacement, check the front alignment and recheck the bolts after the first few drives.
- Match the year and trim before ordering
- Inspect the upper mount and bushings
- Check alignment after fitting
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55221 |
| UPC | 10039703006351 |
| Series | RS5000X Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop |
| Compressed length | 14.500 |
| Extended length | 23.688 |
| Travel length | 9.188 |
Vehicle fitment
It fits Dodge Ram 1500 trucks from 1994 to 2001 and 2006 to 2008, Dodge Ram 2500 and 3500 trucks from 1994 to 2010, and Ram 2500 and 3500 trucks from 2011 to 2013, in trims such as Base, SLT, ST, SXT and TRX4.
Dodge Ram 1500 years from 2002 to 2005 do not fit, and Ram 1500 models from 2009 onward are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The compressed and extended lengths are printed without units, so measure your existing front shock and compare before choosing this one.
What’s included
One front shock absorber, part number RS55221, is included. Mounting hardware is not part of the package, so check the package contents against your installation before starting.












