Select your vehicle

Rancho RS9000XL Series Shock Absorber – RS999129

Rancho

Shop Jeep Cherokee XJ Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS999129 rear RS9000XL shock absorber, designed for a 0 to 1.5 inch lift.
  • Fitment list covers 1984–2001 Jeep Cherokee (XJ) and 1984–1990 Jeep Wagoneer (SJ).
  • 18mm piston rod with 9-position manual or remote tuning.
  • Nitrogen gas charged, protective boot included.

Description

Overview

It is a gas-charged rear RS9000XL shock absorber, part number RS999129, for a 0 to 1.5 inch lift. It fits the 1984 to 2001 Jeep Cherokee (XJ) and 1984 to 1990 Jeep Wagoneer (SJ).

It has an 18mm piston rod and 9-position manual or remote tuning, with a nitrogen gas charge and a protective boot. The tuning works as a fingertip adjustment for ride comfort and off-road control.

Key features

  • Rear-position shock for a 0 to 1.5 inch lift.
  • 18mm piston rod.
  • 9-position manual or remote tuning.
  • Nitrogen gas charged.
  • Protective boot included.

Lift range and rear damping

A rear shock for a Cherokee or Wagoneer has to cope with a body that sits fairly high and a rear axle that sees uneven loads from passengers and cargo. Good damping keeps the rear end from pitching after bumps, and it helps the vehicle feel settled on dirt roads and trails. Consistent control also makes the ride more predictable when the tires hit a sudden dip.

Staying within a small lift range matters. A shock is designed around its travel, and a lift past the rated range can change the angle of the shock and the load on its mounts. If the vehicle has a larger lift, plan on a shock rated for that height rather than stretching this one beyond its design.

  • Check rear spring condition before fitting
  • Inspect the boot for tears after trail use
  • Look for leaks along the shock body

Specifications

Brand Rancho
Part number RS999129
Shock series RS9000XL
Position Rear
Lift height 0 to 1.5 in.
Piston rod diameter 18mm
Tuning 9-position, manual or remote
Gas charge Nitrogen gas charged
Included Protective boot
Fitment type Direct fit

Vehicle fitment

Rancho’s manufacturer list covers the 1984–2001 Jeep Cherokee (XJ), including Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the 1984–1990 Jeep Wagoneer (SJ) with Base and Limited trims.

The list does not include Grand Cherokee (ZJ or WJ), Wrangler or Liberty models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check that your rear lift height falls within 0 to 1.5 inches before installation, since the shock is listed only for that range.

What’s included

One rear shock absorber with a protective boot is described. No other included items are named.

SKU: RANRS999129 Category:

Specification

Shipping weight 5.90 lbs
Package dimensions 24.10 × 3.30 × 3.10 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–2001Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
Jeep Wagoneer (SJ)1984–1990Base, Limited

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RS999129 fit a Jeep Cherokee XJ?

Yes, it fits the 1984 to 2001 Jeep Cherokee (XJ), including Base, Briarwood, Chief, Classic and Sport trims. It also fits 1984 to 1990 Jeep Wagoneer (SJ) models. Check your year, model and trim before buying.

Is this a front or rear shock?

It is a rear-position RS9000XL shock absorber for a 0 to 1.5 inch lift. It has an 18mm piston rod and 9-position manual or remote tuning, with a nitrogen gas charge and a protective boot.

What identifier should you use for the RS999129?

Use the Rancho part number RS999129 to identify this shock when ordering. It is a rear-position unit for a 0 to 1.5 inch lift, with an 18mm piston rod and a protective boot.

Do XJ rear shocks need replacing in pairs?

Yes, in most cases. Replacing both rear shocks together keeps the damping balanced and avoids a pull or uneven settling when you drive over bumps. A single new shock beside an old one can feel mismatched.

What is a common sign of rear shock wear on these Jeeps?

Look for bouncing after a dip, rear end sway in corners, and a boot that has torn or cracked. Oil on the body of the shock also means the damper has started to leak and should be replaced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Cherokee XJ Shock Absorbers on Amazon