Overview
The Rancho RS9000XL Series Shock Absorber, part number RS999236, is a rear shock absorber for the 1997-2003 Ford F-150 and the 2004 Ford F-150 Heritage. It is gas charged with a 2.75 in. body diameter and an 18mm chrome rod, and its 9-position tuning lets you change the damping between manual and remote settings.
Rancho rates this rear shock Direct Fit with a 0 in. lift/drop, meaning it is intended for a truck with no lift or drop. The red urethane and polyurethane bushings and the liquid metallic finish are part of the build, and a protective boot comes with the unit.
Key features
- 9-position manual or remote tuning through the myRide system
- 18mm chrome rod
- 2.75 in. (70mm) body diameter
- Nitrogen gas charged
- Red urethane and polyurethane bushings
- Liquid metallic finish
- Protective boot included
Installing and removing gas shocks
Gas-charged shocks remain pressurized after they are removed from the truck, so treat the old unit with care. Wear eye protection, support the axle before taking out the old shock, and keep your hands clear of the rod while loosening the mounts. Bushings and mounting hardware should be inspected at the same time, since a worn bushing can cause the new shock to bind or wear quickly.
When the new shock is in place, cycle the suspension by hand through its travel to check for smooth movement. Confirm the boot sits correctly on the rod and that the mounts are clear of the frame and axle. Recheck the mounting hardware after the first short drive, since bolts can settle as the bushings seat.
- Wear eye protection when removing the old unit
- Support the axle before disconnecting the shock
- Cycle the suspension by hand before the first drive
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999236 |
| UPC | 10039703092361 |
| Shock series | RS9000XL |
| Position | Rear |
| Fitment type | Direct Fit |
| Lift height | 0 in. lift/drop |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote (myRide) |
| Gas charge | Nitrogen gas charged |
| Finish | Liquid metallic |
| Bushings | Red urethane and polyurethane |
| Boot | Protective boot included |
| Warranty | Limited lifetime warranty |
Vehicle fitment
It fits the 1997-2003 Ford F-150 (Base, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT) and the 2004 Ford F-150 Heritage (XL, XLT).
The Ford F-150 entries above are the only vehicles on this list; the Expedition and F-250 are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks stay pressurized after they are removed, so wear eye protection and support the axle before taking out the old unit.
What’s included
One rear shock absorber with its protective boot. Check the package contents against your installation before starting.














