Overview
The Rancho RS999152 is a front RS9000XL Series shock absorber for Chevrolet and GMC K1500 and K2500 pickups, Suburbans, the Chevrolet Blazer, Tahoe and GMC Yukon, from 1988 through 2000.
This shock is built for trucks carrying 1.5 to 2.5 inches of lift. It has a 2.75-inch (70mm) body, an 18mm chrome rod and a nitrogen gas charge, and it offers a myRide 9-position manual/remote tuning system for adjusting firmness. The finish is liquid metallic, and the bushings are polyurethane.
Key features
- Rated for 1.5 to 2.5 inches of lift
- Nine damping positions with manual or remote tuning
- 18mm chrome rod, with Nitro Carb rod construction noted by Rancho
- 2.75-inch (70mm) body with a nitrogen gas charge
- Protective boot included
Before you buy
Lift height decides how long a shock needs to be and how much travel it has to work through. A truck with a suspension lift often runs a different ride height at each corner, so measure the front and rear before comparing shocks. If the front is raised more than the rear, a shock set for the lower height can bottom out or sag. Measuring first saves a return trip and keeps the suspension geometry where the builder intended.
Adjustable shocks are useful when a truck sees both pavement and gravel. A firmer setting helps control body roll on the highway, while a softer one lets the axle follow rough ground. Many owners leave the setting in the middle and adjust only when the load or terrain changes. Bushings and mounting hardware wear with time, so inspect them when the shock is replaced, and replace any cracked bushings before reinstalling.
- Measure front and rear ride height before comparing shocks
- Check the boot for cracks and fluid seepage
- Inspect mounting bushings when replacing the shock
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999152 |
| UPC | 10039703091524 |
| Shock series | RS9000XL |
| Position | Front |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote |
| Charge | Nitrogen gas charged |
| Lift rating | 1.5 to 2.5 in. lift |
| Finish | Liquid metallic |
| Bushings | Polyurethane (red urethane) |
| Boot | Protective boot included |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
The manufacturer list includes Chevrolet K1500 from 1988 to 1999, K1500 Suburban from 1992 to 1999, K2500 from 1988 to 2000, Blazer from 1992 to 1994 and Tahoe from 1995 to 2000. It also includes GMC K1500 from 1988 to 1999, K1500 Suburban and K2500 Suburban from 1992 to 1999, K2500 from 1988 to 2000 and Yukon from 1992 to 2000.
K3500 models, V-series trucks and the Escalade are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since the rating is 1.5 to 2.5 inches, a truck with less or more lift falls outside the listed range and should be checked before fitting. Measure your current suspension height first.
What’s included
One RS999152 front shock absorber with its protective boot.
Not included: Brackets and fasteners are not included; check your existing mounting hardware before starting the install.














