Overview
The Rancho RS999188 is a front RS9000XL Series shock absorber for 1986–1994 Nissan D21, 1998–2004 Nissan Frontier and 2000–2004 Nissan Xterra. Its gas-charged body is 2.75 in. (70mm) across, and an 18mm chrome rod carries nine tuning positions adjusted by hand or with a remote.
It is a direct fit for the front position and is tied to a 2.5 in. lift. Together with the front position, that lift figure makes it a front-end replacement for the Nissan models below.
Key features
- Nine-position tuning through the myRide manual or remote system
- 18mm chrome rod for the front position
- Nitrogen gas charge
- Liquid metallic finish with red urethane bushings
- Protective boot included
- Limited lifetime warranty
Front shock and lift height
On a front axle, the shock works with the springs and steering to control dive, body roll and wheel bounce. A worn front shock can cause a floating feel at highway speed and uneven tire wear across the tread. Compare the damping feel on both sides and inspect the mounting eyes for looseness.
Lift height changes how far the front shock extends and compresses, so it matters for fit as well as ride. Before ordering, measure the current lift and compare it with the shock’s specified figure. Steering components and brake lines near the shock should also be checked for clearance after installation.
- Check front tire wear patterns
- Look for leaks along the shock body
- Confirm brake line clearance after fitting
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999188 |
| UPC | 10039703091883 |
| Shock series | RS9000XL |
| Position | Front |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual or remote (myRide) |
| Charge | Gas charged, nitrogen |
| Bushings | Polyurethane |
| Finish | Liquid metallic |
| Lift height | 2.5 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1986–1994 Nissan D21 (Base, E, SE and XE), 1998–2004 Nissan Frontier (Base, SC, SE, SVE and XE), and 2000–2004 Nissan Xterra (SE and XE).
Nissan Frontier models before 1998 or after 2004 are not on this list, and rear-position shocks in this series carry other part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is tied to a 2.5 in. lift in Rancho’s specification. Vehicles with a different lift height should be checked against that figure before installation, since no lift range is given for this part.
What’s included
Only the protective boot is named as included with this front shock.














