Overview
The Rancho RS7240 is a rear monotube shock absorber in the RS7000MT Series, made for 2004–2006 Jeep Wrangler LJ and 1997–2006 Jeep Wrangler TJ models. Its gas-charged monotube body uses ten-stage velocity-sensitive valving, a 14mm chrome rod and a protective boot.
The shock responds to off-road obstacles, and its design aids heat dissipation for less fade. Its lift/drop is 0 in., so it is intended for a rear position with no lift or drop.
Key features
- Rear-position shock for the listed Wrangler generations.
- Gas-charged design that Rancho describes as aiding heat dissipation and reducing fade.
- Ten-stage velocity-sensitive valving.
- 14mm chrome rod.
- Black natural rubber bushings.
- Protective boot included.
Wrangler rear shock basics
A rear shock on a Wrangler controls the axle as the leaf springs compress and rebound. Because the rear tire takes a lot of trail load, the damper matters for keeping the back end settled over ruts and rocks. Gas-charged monotube shocks help limit heat buildup, which keeps damping consistent on longer runs.
Replace rear shocks with the rest of the rear suspension in mind. Spring perches, bump stops and mounting hardware can wear and change how the shock works. During installation, check for clearance against the tire, the brake line and the bump stop, and confirm the boot is seated correctly so grit stays out of the shaft.
- Oily body or leaking seal
- Bouncy rear end after bumps
- Cracked or hardened bushings
- Rubbing on the boot or brake line
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7240 |
| UPC | 10039703003183 |
| Shock series | RS7000MT Series |
| Position | Rear |
| Design | Monotube, gas charged |
| Body diameter | 1.97 inch (50mm) |
| Rod | 14mm chrome |
| Valving | Ten-stage, velocity-sensitive |
| Bushings | Black natural rubber |
| Lift/drop | 0 in. |
| Finish | Brushed-zinc clear coat |
| Fitment type | Direct fit |
Vehicle fitment
Fits 2004–2006 Wrangler (LJ), including Unlimited and Unlimited Rubicon, and 1997–2006 Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X.
Other Jeep generations, and Wrangler model years after 2006, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The protective boot is supplied with the RS7240.
Not included: Gather the mounting hardware your installation requires before you begin.












