Overview
The Rancho RS55066 is a rear RS5000X Series gas-charged shock absorber for the 2018 Jeep Wrangler (JL), with fitting for the Rubicon, Sport, Sport S and Unlimited trims. It is a direct fit unit with a lift height of w/2 in. Lift.
The RS5000X is a cross-tuned design built around a patented valving system and advanced compression functionality, which is intended to improve on- and off-road handling. The valving sits inside a gas-pressurized twin tube body with a 16mm nitro-carburized rod and a 35mm bore.
Key features
- Progressive engagement valving
- Tuned compression control valve
- Enlarged 2-1/4 inch twin tube body
- Gas pressurized shock body
- 16mm nitro-carburized rod
- Full-displaced 35mm bore
- Rebound bumper and protective boot
- Low-friction, self-lubricating seal
- Glass-filled, Fluon banded piston with double-welded loops
Signs of a worn rear shock
Rear shocks wear gradually, and the change often shows first as a slightly floaty feel over dips or a clunk when the rear axle reaches the top of its travel. A gas charged design helps keep damping consistent over time, but the seals and valving still wear with mileage and exposure to trail debris.
Inspecting a rear shock is simple. Look at the body for fluid, check the eyes and bushings for cracks, and bounce each corner of the vehicle to see whether the motion settles quickly. A shock that keeps rocking after a push has likely lost its damping.
- Look for fluid on the shock body
- Check the eyes and bushings for cracks
- Bounce each rear corner to test damping
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55066 |
| UPC | 10039703010143 |
| Series | RS5000X Series |
| Position | Rear |
| Fitment type | Direct Fit |
| Lift height | w/2 in. Lift |
| Damping | Gas charged |
| Compressed length | 19.41 (unit not stated) |
| Extended length | 28.59 (unit not stated) |
| Travel length | 9.18 (unit not stated) |
| Piston rod | 16mm nitro-carburized |
| Bore | 35mm full-displaced |
| Piston | 1-3/8 inch diameter sintered iron, glass-filled Fluon banded |
| Bushings | Black, natural rubber |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
Wrangler generations before JL, including the TJ, LJ and JK, are not on this list, and the Gladiator (JT) is not either. Verify the vehicle year and trim against the list before fitting.
What’s included
The package is one rear shock absorber. Confirm whether mounting hardware is needed before starting the installation.












