Overview
The Rancho RS98501 is a dual steering stabilizer kit from the RS5000 Series, sold as a complete kit with stabilizer shocks, brackets and hardware. Rancho describes dual setups as suited to aggressive off-road driving and vehicles running 35-inch or larger tires.
A red shock boot is included. The specifications name no year, make or model, so the kit is not matched to any specific vehicle.
Key features
- Dual setup with stabilizer shocks
- Complete kit with brackets and hardware
- Red shock boot included
- Rancho positions the dual setup for 35-inch or larger tires
Choosing a steering stabilizer setup
A steering stabilizer damps the quick side-to-side movement of the front axle that rough ground, large tires or a hard steering input can cause. A dual setup adds a second shock, so the damping load is shared between two points on the axle. Builders often choose that layout for heavier tires and fast trail driving, where one shock may run short of control.
Before fitting a dual kit, look at the rest of the steering system. Tie rod ends, the drag link and the track bar all affect how the stabilizer is loaded, and worn joints can make the shocks bind or wear early. Inspect the axle and frame mounting points for cracks, bent brackets and loose hardware, because they carry the force every time the shocks work.
Stabilizer shocks wear out over time. Common signs include fluid on the shock body, a clunk at center, or a wobble that keeps going after the steering has settled. Replacing a worn unit with a matched pair keeps damping even on both sides of the axle.
- Inspect shock bodies and boots for leaks
- Recheck bracket bolts after the first few trail runs
- Replace worn tie rod ends alongside the stabilizer
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS98501 |
| UPC | 39703985017 |
| Series | RS5000 Series |
| Type | Complete kit |
| Single / dual | Dual |
| Brackets | Included |
| Hardware | Included |
| Stabilizer shocks | Included |
| Shock boot | Red shock boot included |
| Tire size guideline | 35-inch or larger |
Vehicle fitment
The kit is not tied to a vehicle year, make or model. Match the 35-inch or larger tire size to your own setup, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit has its own brackets and hardware, so no separate mounts are called for. Dual setups use a pair of stabilizer shocks, so confirm both mounting positions before tightening, and recheck all fasteners after the first drive on rough trails.
What’s included
Dual stabilizer shocks, brackets, hardware and a red shock boot.









