Overview
The Rancho RS7129 is a rear-mount RS7000MT monotube steering stabilizer for the 1984 to 2001 Jeep Cherokee (XJ) and 1984 to 1990 Jeep Wagoneer (SJ). Rancho built the RS7000MT from the foundation of its RS7000 series shock, engineered for Jeeps and trucks running oversized tires and wheels.
The monotube design is intended to reduce wheel shimmy, bump steer and vibration while tightening steering response, which can ease driver fatigue on and off road. The series is covered by a Limited Lifetime Warranty.
Key features
- Monotube design built from the RS7000 series shock
- Rear position direct fit steering stabilizer
- Reduces wheel shimmy, bump steer and vibration with oversized tires and wheels
- Bolts to original equipment mounts
- Lift range of 0 to 1.5 inches in the specifications
- Limited Lifetime Warranty on the series
Lift height and steering geometry
Lift changes the angle of the steering linkage and the position of the stabilizer relative to the axle. As lift increases, the cylinder works through a different range of motion, so confirm the lift height falls within the range of the stabilizer before installing it. A rear-mount stabilizer on a Cherokee or Wagoneer also has to clear the rear axle and brake lines.
Monotube construction handles heat better than twin-tube designs under sustained use, which helps on long trail runs. Oversized tires increase steering loads, so check that the bushings and ends are sound before adding a larger wheel and tire combination.
Inspect the stabilizer at each service interval. Look for oil residue on the body, play in the eye mounts and cracks in the bushings. Replacing a worn stabilizer restores steering control, and replacing the mounting bushings alongside it keeps the new unit from working loose.
- Check that the lift height is within the stabilizer range
- Look for oil residue on the body
- Inspect eye mounts and bushings for play
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7129 |
| UPC | 10039703003190 |
| Model | RS7000MT Monotube |
| Position | Rear |
| Mounting | Bolts to original equipment mounts |
| Lift height | 0 to 1.5 in. (w/0 – 1.5 in. Lift) |
| Fitment type | Direct fit |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Rancho’s manufacturer fitment list covers the 1984 to 2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the 1984 to 1990 Jeep Wagoneer (SJ) in Base and Limited trims.
The list does not include the Jeep Wrangler or Grand Cherokee. Rancho’s summary mentions 0 to 3 inch of lift while its specifications give 0 to 1.5 inches, so check your lift height before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stabilizer bolts to original equipment mounts, so compare your existing mounting points with the specifications before installing. Keep your lift height within the range stated above.
What’s included
One Rancho RS7000MT monotube steering stabilizer.
Not included: No brackets, hardware kit or shock boot are included. Check the contents against your installation before starting.









