Overview
The Rancho RS5405 is a single steering stabilizer cylinder from the RS5000 Series, sold as a stabilizer-only unit. It is a replacement part for stock and lifted applications.
The cylinder uses 5/8-in. (16 mm) and 1/2-in. (12 mm) rods, with a nitro-carburized rod finish in place of chrome. A red shock boot is included, while the brackets are not.
Key features
- Single cylinder in the RS5000 Series
- Stabilizer only, no brackets
- Red shock boot included
- Rod finish changed from chrome to nitro-carburized coating
- Rods listed at 5/8-in. (16 mm) and 1/2-in. (12 mm)
Rod finish and seal care
The rod finish on a steering cylinder protects the steel from corrosion and grit, and a coating change can affect how the seals wear over time. A nitro-carburized surface is a hard finish, but it still needs clean, dry conditions to last. Off-road use puts the rod in contact with mud and stones, so cleaning matters.
Wipe the rod after washing or after a trail run, and look for pitting, scoring or rust spots that can damage the seal. Keep the red boot seated over the rod so dirt stays out. If the boot is cracked, replace it before grit reaches the seals, and recheck the mounting hardware for play. Torque checks after the first drives are a sensible habit.
- Wipe rods clean after off-road runs
- Look for pitting along the rod
- Keep the boot seated over the rod
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5405 |
| UPC | 10039703540503 |
| Series | RS5000 Series |
| Quantity | Single |
| Type | Stabilizer only |
| Brackets | Not included |
| Shock boot | Red shock boot included |
| Rod sizes | 5/8-in. (16 mm) and 1/2-in. (12 mm) |
| Rod finish | Nitro-carburized coating (changed from chrome) |
| Fitment type | Direct fit |
Vehicle fitment
No vehicles are named, so the make, model and years are not confirmed for the RS5405. It carries a direct-fit designation.
Check the mounting arrangement on your vehicle against the cylinder before you buy it.
Installation notes
Because brackets are not included, the mounting arrangement on your vehicle has to be confirmed before fitting the cylinder. Rod size and finish are listed, so compare them against the part being replaced.
What’s included
Supplied: one RS5000 cylinder with its red shock boot.
Not included: brackets.









