Overview
The Rancho RS98510 is a dual steering stabilizer kit from the RS5000 Series, with brackets, hardware and stabilizer shocks included. Rancho describes dual setups as built for aggressive off-road driving and tires of 35-inch or larger.
The specifications also name Rancho’s RS6510 and RS6511 as the system this kit is listed with, so check those part numbers if you are matching an existing setup. No vehicle is named.
Key features
- Dual kit with stabilizer shocks
- Includes brackets, hardware and stabilizer shocks
- Red shock boot included
- Listed with the Rancho RS6510 and RS6511 system
Matching an existing steering setup
Replacing a steering stabilizer is easiest when the new kit lines up with the parts already on the vehicle. Start by noting where the current shock and brackets attach, and whether the setup uses one shock or two. A dual layout puts more hardware on the axle and frame, so the mounting points need checking before any new parts are fitted.
Related parts often get replaced in the same job. Tie rod ends, drag link ends and steering bushings wear in ways that change how the stabilizer loads, so inspect them by hand for play. Replacing a worn joint at the same time avoids a repeat trip and keeps the new kit working as intended.
After installation, turn the steering lock to lock with the vehicle parked and watch for contact between the shock, brackets and nearby hoses or wiring. New hardware can settle as the threads bed in, so recheck the fasteners after the first few drives on rough roads.
- Compare bracket locations with your current mounts
- Check tie rod ends and drag link for play
- Confirm clearance at full steering lock
- Look over the track bar bushings
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS98510 |
| UPC | 39703985109 |
| Series | RS5000 Series |
| Type | Complete kit |
| Single / dual | Dual |
| Brackets | Included |
| Hardware | Included |
| Stabilizer shocks | Included |
| Shock boot | Red shock boot included |
| Related system | RS6510 / RS6511 |
| Tire size guideline | 35-inch or larger |
Vehicle fitment
The kit is not tied to a vehicle year, make or model. Match the 35-inch or larger tire size to your own setup, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the RS6510 and RS6511 are named as a related system, confirm which parts your current setup already uses before mounting this kit. Recheck the stabilizer fasteners once the vehicle has been driven.
What’s included
Dual kit with brackets, hardware, stabilizer shocks and a red shock boot.









