Overview
The Rancho RS5403 is a single front steering stabilizer cylinder from the RS5000 series, suited to stock and lifted trucks. It is designed to help improve tire wear and give steadier control.
It is a direct fit and comes with a red shock boot. Brackets are not included. It fits older Chevrolet K10 and K20 pickups, Dodge Ram 2500 and 3500 trucks, Dodge W-series trucks, Ford Bronco and F-series pickups, GMC K15 and K25 trucks, International Scout, Jeep Gladiator and J-series trucks, Plymouth Trailduster and Toyota pickups.
Key features
- Single front stabilizer cylinder for the RS5000 series
- Direct fit listed by the manufacturer
- Red shock boot included
- Rods of 5/8-in. (16 mm) and 1/2-in. (12 mm) with nitro-carburized coating
- Stabilizer only, brackets not included
Stock versus lifted trucks
Stock and lifted trucks load a stabilizer differently. A lift raises the axle and steepens the angle of the cylinder, which can change how far it travels and how much pressure it sees in tight turns. Tires that are larger than stock add leverage on the steering, so the stabilizer does more damping work on the highway and on washboard roads.
Older pickups often have worn steering parts that show up as shimmy, not just a stabilizer problem. Check the tie rods, drag link, pitman arm and ball joints before replacing the cylinder, and make sure the mounts are free of rust or cracks. A single cylinder works best when the rest of the front end is tight and the wheels track straight.
- Measure the mounting points before purchase
- Verify cylinder travel at full steering lock
- Inspect the red boot for tears
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5403 |
| UPC | 10039703540305 |
| Series | RS5000 Series |
| Type | Stabilizer only |
| Position | Front |
| Single / dual | Single |
| Fitment | Direct fit |
| Shock boot | Red |
| Sizes listed | 5/8-in. (16 mm) and 1/2-in. (12 mm) |
| Rod finish | Changes from chrome to nitro-carburized coating |
| Brackets | Not included |
Vehicle fitment
The manufacturer fitment list for the RS5403 covers older Chevrolet K10 and K20 pickups, Dodge Ram 2500 and 3500, Dodge W100 through W350, Ford Bronco and F-100 through F-250, GMC K15 and K25 trucks, International Scout and Scout II, Jeep Gladiator, J-100 through J-4800 and Truck models, Plymouth Trailduster and Toyota Pickup and 4Runner, with years and trims shown on the Fitment tab.
Ram 1500 models are not on this list, and later Ford F-150 and Chevrolet Silverado generations are not included either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because brackets are not included, check that your truck’s existing stabilizer mounting points match the cylinder before you begin.
What’s included
The kit includes the stabilizer cylinder and a red shock boot. Check the package contents against your installation before starting.
Not included: brackets.









