Overview
The Rancho RS7412 is a front steering stabilizer from the RS7000MT Series, built as a monotube stabilizer for listed Dodge Ram trucks. It is a single stabilizer with a red shock boot and a limited lifetime warranty, and the listed fitment covers the Dodge Ram 1500, 2500 and 3500 models shown in the fitment section below.
Stabilizers like this one are designed to reduce steering shimmy and driver fatigue. They can also help protect front-end suspension components and ease tire wear. Brackets are not included, so plan the mounting setup before starting.
Key features
- Monotube design from the RS7000MT Series
- Single stabilizer; stabilizer only
- Red shock boot included
- Front position
- Limited lifetime warranty
- Designed to reduce steering shimmy and driver fatigue
Steering stabilizers explained
A steering stabilizer is a damper that connects the front axle to the frame and works against sudden side-to-side movement of the wheels. When a tire hits a rut, a bump or a rock at speed, the stabilizer slows that motion so the steering wheel is less likely to shake in your hands. Monotube designs use one tube and a single piston, which tends to keep the damping steady as the unit warms up on long grades and rough sections.
Stabilizers wear out through bushing deterioration, leaks at the seals and a gradual loss of damping. Check the boot for tears and the ends for play, and watch for a steering wheel that wanders or a shimmy that returns after a tire balance. Replacing a stabilizer alone rarely fixes a worn tie rod or ball joint, so inspect those parts while the front end is raised.
- Inspect the boot and bushings at every service interval
- Replace worn tie rods or ball joints in the same visit
- Re-check fasteners after the first few drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7412 |
| UPC | 10039703003930 |
| Series | RS7000MT Series |
| Design | Monotube |
| Position | Front |
| Single or dual | Single |
| Type | Stabilizer only |
| Shock boot | Red, included |
| Brackets | Not included |
| Warranty | Limited lifetime |
Vehicle fitment
The listed fitment covers the Dodge Ram 1500 (2000–2008) with trims Laramie, SLT, ST, SXT, Sport and TRX4; the Dodge Ram 2500 (2000–2008) with trims Base, Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX4; and the Dodge Ram 3500 (2000–2010) with trims Base, Laramie, SLT, ST, SXT, Sport and TRX4.
Ram 1500 and 2500 models from 2009 on are not covered by this list, while the 3500 range runs through 2010. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so the mounting brackets for your application need to be sourced separately. Confirm the bracket part numbers needed for your vehicle before starting. After mounting, a front-end alignment check is a sensible step.
What’s included
The stabilizer is listed with its red shock boot included.
Not included: brackets.









