Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5368

Rancho

Shop Ram 1500 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5368 RS5000 Series front shock absorber for Ram 1500 trucks
  • Fitment list covers 2009-2010 Dodge Ram 1500 and 2011-2017 Ram 1500
  • Gas-charged with ten-stage velocity sensitive valving
  • Listed lift setting: w/0 in. Lift/Drop
  • Red protective boot included

Description

Overview

The Rancho RS5368 is a front-position RS5000 Series gas-charged shock absorber for the Ram 1500. It fits the 2009 to 2010 Dodge Ram 1500, including the TRX, and the 2011 to 2017 Ram 1500.

Built as a light truck shock for stock and raised suspensions, the RS5368 combines ten stages of velocity-sensitive valving with a 5/8-in. (16mm) piston rod and a 1 3/8-in. (35mm) piston. It is designed for both on-road and off-road driving.

Key features

  • Front-position shock for Ram 1500 trucks
  • Ten-stage velocity sensitive valving
  • 5/8-in. (16mm) diameter piston rod
  • 1 3/8-in. (35mm) diameter piston
  • Gas-charged body
  • Listed lift setting: w/0 in. Lift/Drop
  • Red protective boot included

Front shocks for half-ton pickups

Half-ton pickups put a lot of work on their front dampers, especially when the truck carries a load or runs over washboard and rough trail. A front shock controls the wheel’s rebound, keeps the tires in contact with the ground and steadies steering at highway speed. Gas-charged designs help damping stay consistent when the shock heats up during repeated hard use.

When replacing front shocks, look for oil on the body, a torn boot, worn upper mounts and cracked bushings. Inspect ball joints, tie rod ends and the steering damper if the truck has one, because loose parts can make a new shock feel vague. Replace front shocks in pairs for even steering and recheck the mounting bolts after the first few drives.

Specifications

Brand Rancho
Part number RS5368
UPC 10039703001134
Series RS5000 Series
Position Front
Valving Ten-stage velocity sensitive
Piston rod diameter 5/8-in. (16mm)
Piston diameter 1 3/8-in. (35mm)
Hydraulic or gas charged Gas charged
Lift listing w/0 in. Lift/Drop
Fitment type Direct fit
Sold as Each

Vehicle fitment

It fits the 2009-2010 Dodge Ram 1500 in Laramie, SLT, ST, Sport and TRX trim, and the 2011-2017 Ram 1500 in Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Sport and Tradesman trim.

TRX fit applies only to the 2009-2010 Dodge Ram 1500. Ram 2500 and 3500 trucks are not covered, and years after 2017 are not covered either. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

This shock is for the front position only, so confirm you have the front unit before fitting it. Compare the w/0 in. Lift/Drop setting with your truck’s current ride height before installing.

What’s included

One RS5000 Series front shock absorber with a red protective boot, sold as each.

SKU: RANRS5368 Category:

Specification

Shipping weight 4.40 lbs
Package dimensions 24.10 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Dodge Ram 15002009–2010Laramie, SLT, ST, Sport, TRX
Ram 15002011–2017Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Sport, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rancho RS5368 fit a Ram 1500 TRX?

The TRX trim fits the 2009 to 2010 Dodge Ram 1500 only. Other Ram 1500 model years do not include TRX, so confirm your vehicle's year, model and trim before ordering.

Is the RS5368 a front or rear shock?

It is a front-position shock. The lift setting is w/0 in. Lift/Drop, so check that figure against your truck's current ride height before installing.

Will the RS5368 fit a 2018 Ram 1500?

2018 Ram 1500 models are not covered, since the range ends with the 2011 to 2017 trucks. Confirm fit for your vehicle's year, model and trim before ordering, and check the package contents against your installation before starting.

What is the UPC for the RS5368?

The UPC is 10039703001134 and the part number is RS5368. It is a gas-charged front shock in the RS5000 Series with a red protective boot included.

Can I use a front shock on the rear of a Ram 1500?

No. The RS5368 is built for the front position, so it should not be used on the rear axle. Confirm the position on the box and on your truck before installing to avoid a mismatch in damping and mounting.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 1500 Shock Absorbers on Amazon