Overview
The Rancho RS999926 is a 1.25-inch Loaded QuickLift quick-strut for the rear right position, made for the 2007–2012 Ford Expedition and Expedition EL. The QuickLift design levels the front of a pickup or SUV and removes factory nose-down rake, so confirm the corner matches your application before installation.
The unit is supplied as a complete assembly that includes the strut body, coil spring and upper mount. Ride quality adjusts across 9 positions, and the strut is compatible with the myRIDE Wireless Controller for changing those settings from the cab as road conditions change.
Key features
- Complete assembly with strut, coil spring and upper mount
- 1.25-inch lift in the QuickLift Series
- 9 adjustable positions for ride quality
- Compatible with the myRIDE Wireless Controller
- Gas charged design
- Copy states tires up to 35 inches are possible, depending on application
- Direct Fit type
Before you buy
A quick-strut combines the shock damper, spring seat and upper mount into one unit, so a worn strut usually means the whole assembly is replaced rather than rebuilt. Because the spring rides on the strut body, the job should be done with the vehicle fully supported and the suspension unloaded. Many owners replace struts in pairs on the same axle so ride, steering response and braking feel even from side to side.
When choosing a strut in this range, consider how the height change affects the rest of the suspension. Raising one corner can alter caster, camber and driveline angles, and worn bushings or ball joints can show up once the new height is set. Adjustable damping lets you change firmness, but a setting that feels right on pavement may feel harsh on rough trails, so give it a few test drives before settling on one.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999926 |
| Lift height | 1.25 inch |
| Shock series | QuickLift Series |
| Position | Rear Right |
| Fitment type | Direct Fit |
| Hydraulic / gas charged | Gas Charged |
| Adjustability | 9 positions |
| Maximum tire size | Up to 35 inches depending on application |
| Included components | Coil spring, upper mount, strut |
| Controller compatibility | myRIDE Wireless Controller |
Vehicle fitment
It fits the 2007–2012 Ford Expedition in Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XL and XLT trims, and the 2007–2012 Ford Expedition EL in Eddie Bauer, King Ranch, Limited, XL and XLT trims.
It is made for the Expedition and Expedition EL trims shown above and is placed at the rear right. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the rear right position matches your vehicle before installation. Replacing a strut changes ride height, so have the alignment checked afterward. Use stands for support before any suspension work begins.
What’s included
The kit includes the strut, coil spring and upper mount.
Not included: the myRIDE Wireless Controller, which pairs with the strut for in-cab adjustment.









