Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5194

Rancho

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5194 rear shock absorber from the RS5000 Series
  • Fits 1993–1998 Jeep Grand Cherokee (ZJ)
  • Designed for 2 to 3 in. of lift
  • Twin tube cellular gas design with ten-stage velocity sensitive valving
  • 5/8-in. (16 mm) and 1/2-in. (12 mm) rods, 1-3/8 inch piston

Description

Overview

The Rancho RS5194 is a rear shock absorber from the RS5000 Series, made for the 1993–1998 Jeep Grand Cherokee (ZJ). It is a direct fit for 2 to 3 in. of lift.

The unit uses a twin tube cellular gas design and ten-stage velocity sensitive valving. Its rods measure 5/8-in. (16 mm) and 1/2-in. (12 mm) in diameter, changing from chrome to nitro-carburized coating, with a 1-3/8 inch diameter piston.

Key features

  • Twin tube cellular gas design
  • Ten-stage velocity sensitive valving
  • Rods change from chrome to nitro-carburized coating
  • 1-3/8 inch diameter piston
  • Gas charged body

On the trail

A rear shock controls how fast the axle moves up and down after a bump, which keeps the tires in contact with the ground on washboard roads and rocky trails. On a ZJ, the rear shocks work alongside the springs and axle, so a worn unit can make the back end feel loose or bouncy at speed.

When choosing rear shocks, think about how the vehicle is used. A twin tube design with gas charge handles repeated cycling better than a basic unit, and matching the shock to the amount of lift keeps the ride balanced. Replacing both rear shocks at the same time gives the axle even damping on both sides.

  • Inspect the mounting eyes and bushings during each service
  • Check for oil streaks down the body of the shock
  • Tighten mounting bolts again after the first few trail runs

Specifications

Brand Rancho
Part number RS5194
UPC 10039703519400
Series RS5000
Design Twin tube cellular gas
Valving Ten-stage velocity sensitive
Rod diameter 5/8-in. (16 mm) and 1/2-in. (12 mm)
Rod finish Chrome changing to nitro-carburized coating
Piston 1-3/8 inch diameter
Position Rear
Fitment type Direct fit
Lift range 2 to 3 in. lift
Charge Gas charged
Warranty Limited lifetime

Vehicle fitment

It fits the following vehicle:

  • 1993–1998 Jeep Grand Cherokee (ZJ) (5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi)

Other Grand Cherokee generations, including the 1999–2004 WJ, and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The package is one shock absorber. Look over what arrives against your installation before starting.

SKU: RANRS5194 Category:

Specification

Shipping weight 5.40 lbs
Package dimensions 24.10 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RS5194 fit a 1996 Jeep Grand Cherokee?

Yes. The RS5194 fits 1993 through 1998 Jeep Grand Cherokee (ZJ) models, and 1996 falls within that range. Confirm fit for your vehicle's year, model and trim before ordering.

What lift height is this shock built for?

It is built for 2 to 3 in. of lift and mounts in the rear position. It is a rear shock absorber from the RS5000 Series, part number RS5194, with UPC 10039703519400.

What rod and piston sizes does it have?

The rods are 5/8-in. (16 mm) and 1/2-in. (12 mm) in diameter, changing from chrome to nitro-carburized coating. The piston is 1-3/8 inch in diameter, paired with ten-stage velocity sensitive valving.

How can I tell a rear shock is worn out?

Look for oil leaking down the body, a clunk over bumps, or a shock that bounces more than once after being pushed down by hand. Worn rear shocks can also make the vehicle wander at highway speeds. Replace them in pairs so both sides damp the same way.

Should rear shocks be replaced along with other suspension parts?

Often yes. Worn bushings, mounts or springs can shorten the life of new shocks, so inspect them while the shocks are off. Tighten mounting hardware snugly and recheck it after the first few drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon