Overview
The Rancho RS55165 is a front gas-charged shock absorber from the RS5000X Series, designed for Ford F-250 and F-350 trucks from 1986 through 1999. Its lift rating is w/Red Boot, not a numeric range.
Its compressed length is 14.01, extended length 22.42 and travel length 8.41, with no unit given. Those measurements work well for comparing against the shock being replaced.
Key features
- Designed for the front position
- Direct fit design
- Gas charged damper
- Red boot noted in Rancho’s lift rating
Measuring a front shock swap
Front shocks on Ford heavy-duty trucks have to control a large, heavy front end, so the fit and damping should match the truck’s weight and tires. A quick way to check is to measure the removed shock’s compressed and extended lengths, then compare them with the new unit. Small differences can change how the suspension sits at rest.
Gas-charged front shocks respond well to steady damping when the truck is loaded, but they also need clean mounting surfaces and undamaged bushings. Look for oil on the body, cracks in the rubber, and uneven wear on the front tires, as these can point to a shock that is worn out. Replace the shock when it no longer controls the truck’s bounce.
- Measure the old shock’s lengths
- Compare mount positions before fitting
- Inspect rubber bushings
- Check front tires for uneven wear
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55165 |
| UPC | 39703008433 |
| Series | RS5000 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/Red Boot |
| Hydraulic / gas charged | Gas charged |
| Compressed length | 14.01 |
| Extended length | 22.42 |
| Travel length | 8.41 |
Vehicle fitment
It covers Ford F-250 trucks from 1987 to 1996 and 1998 to 1999 in Base, Custom, Eddie Bauer, Lariat, Special, XL, XLT and XLT Lariat trims, a 1997 F-250 HD in XL and XLT trims, and Ford F-350 trucks from 1986 to 1997.
Other Ford models, such as the F-150, are not covered, and years from 2000 onward fall outside this shock’s fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the compressed and extended lengths of your existing front shock and compare them with 14.01 and 22.42 before choosing this unit.
What’s included
One front shock absorber, part number RS55165. Check for mounting parts against your installation before starting.








