Overview
The Rancho RS5125 is a hydraulic, gas-charged shock absorber from the RS5000 Series, a line built for light trucks and sport utility vehicles. Fitment for the RS5125 is limited to the RS5000 Series direct-fit family, so review the fitment section below before choosing it.
The RS5000 Series is a workhorse shock for on-road and off-road use, engineered to fit both stock and raised vehicles. The RS5125 is covered by a limited lifetime warranty.
Key features
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Hydraulic, gas-charged design in the RS5000 Series
- Engineered for both stock and raised vehicles
- Red protective boot included
Lift height and shock load
A lifted front or rear changes how far the shock travels and how it sits in the mount. Shock length at ride height matters more than the label alone, so measure the installed length of the existing unit before buying. If the new shock is too long, it may bind at full droop; if too short, it can bottom out on large bumps.
Ten-stage velocity sensitive valving responds differently to slow and fast movements, which suits trucks that change between highway and trail. Pair the shock with suspension parts that are in good condition, since worn bushings or a sagging spring can change how the valving performs. Look over the bushings and bump stops at the same time.
Keep the red boot clean and intact, because grit on the rod wears seals.
- Measure installed length at ride height
- Check bump stops for wear
- Inspect bushings alongside the shock
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5125 |
| UPC | 10039703512500 |
| Series | RS5000 Series |
| Shock type | Hydraulic / Gas Charged |
| Valving | Ten-stage velocity sensitive |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Warranty | Limited lifetime |
Vehicle fitment
Confirm fit for the RS5125 by year, make, model and trim before ordering. The only fitment reference is the RS5000 Series direct-fit shock family.
Check your vehicle’s lift height and suspension setup against this shock before installing.
What’s included
One shock absorber with a red protective boot. No other included items are listed.









