Overview
The Rancho RS62100 RockGEAR high-steer knuckle kit is a pair of heavy-duty front steering knuckles for 2007–2018 Jeep Wrangler JK models with a 3-inch or higher lift. The knuckles are designed to maintain steering geometry and add strength at the most vulnerable points of the steering envelope during off-road driving. This is a stock-replacement knuckle, not a cross-over steering conversion.
The knuckles add 1.5 inches of clearance in the tight steering space. That clearance helps protect critical steering components, and the design lifts the steering linkage out of range of direct impact from obstacles. The kit is engineered for both left hand and right hand drive 2-door and 4-door JK models. The kit carries a limited lifetime warranty.
Key features
- Built for 3-inch and higher lifts on Jeep Wrangler JK
- Heavy-duty knuckles constructed from high strength steel
- Adds 1.5 inches of clearance in the steering envelope
- Designed to reduce bump steer.
- Front left and front right knuckles with three-inch bump stops included
- High steer compatible, not cross-over steering compatible
- Limited lifetime warranty
Before installing high-steer knuckles
High-steer knuckles change the geometry at the front wheels, so the steering linkage, track bar and drag link all need to be considered together. A lift that changes ride height also changes the angles of the tie rods and drag link, which is why a shop with lift experience usually handles the swap. Knuckles rarely fail on their own; the joints and bushings around them often wear faster once the geometry is altered.
Before the knuckles go on, inspect the ball joints, tie rod ends and steering stabilizer for play or torn boots. Replacing worn parts during the same job avoids repeat labor later and keeps the new geometry predictable on the trail.
- Check wheel bearings and hub seals while the hubs are open
- Inspect brake lines and ABS wiring for stretch at the new angles
- Recheck bump stop clearance after the first drive
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS62100 |
| UPC | 39703007856 |
| Product line | RockGEAR high-steer knuckles |
| Material | High strength steel |
| Lift requirement | 3 inch or higher |
| Steering compatibility | Left hand and right hand drive; high steer compatible; not cross-over steering compatible |
| Bump stops | Three-inch |
| Clearance gain | 1.5 inches additional |
| Replacement type | Stock replacement |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and X trims, including the Unlimited versions of those trims.
The list does not cover the JL generation or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The knuckles change steering geometry, so a wheel alignment and a check of the steering linkage after installation are advisable. Steering work on a lifted vehicle is best left to a shop with lift experience.
What’s included
The kit includes a front left high-steer knuckle, a front right high-steer knuckle and three-inch bump stops.
Not included: The three-inch track bar relocation bracket (RANRS62101), which is required if your lift does not already include one, and the flipped drag link (RANRS62102), which is needed separately.









