Overview
The Crown Automotive 68004087AA is a left, driver-side front steering knuckle for 2007–2018 Jeep Wrangler (JK) models with 2 and 4-door bodies. It is a stock replacement part, not a high steer or cross over steering knuckle.
It is the driver-side knuckle for 2 and 4-door JK models and is built for left hand drive vehicles. Several JK trims are covered, including the Unlimited versions.
Key features
- Driver-side front position
- Direct fit replacement for JK Wrangler front suspension
- Built for 2 and 4-door models
- Noted for left hand drive vehicles
- Not high steer compatible and not cross over steering compatible
Driver side front end work
The driver side knuckle is the left-hand carrier for the hub, wheel bearing and steering arm. A stock replacement like this restores the factory mounting points, so the work focuses on fitting the knuckle squarely and reconnecting the brake and steering attachments without bending anything.
A driver side swap is a good time to inspect the other pieces on that corner. Check the ball joints, wheel bearing play, brake lines and tie rod end, since replacing one worn joint while the front is apart saves a second job later. Road test the vehicle, listen for clunks, watch for pull to one side and monitor tire wear.
- Inspect ball joints on the same corner
- Check brake lines before reconnecting
- Road test for pull or vibration
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68004087AA |
| UPC | 848399088366 |
| Position | Left (driver side front) |
| Body style | 2 and 4-door models |
| Drive | Left hand drive |
| Replacement type | Stock replacement |
| High steer compatible | No |
| Cross over steering compatible | No |
Vehicle fitment
It fits 2007 to 2018 Jeep Wrangler (JK) models in these trims: 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, along with the matching Unlimited trims.
Other Jeep generations, and Wrangler years outside 2007–2018, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After the knuckle is swapped, a wheel alignment is needed to restore correct toe and steering angles.
What’s included
One driver-side steering knuckle. Check the package contents against your installation, including hardware and bearings, before starting.









