Overview
The Raceline Wheels Enforcer RLW938M-29065-00 is a 20 x 9-inch aluminum spoke wheel with a gloss black and milled finish, set up for a 6 on 135 bolt pattern. It belongs to Raceline’s 938 Enforcer series, which is separate from the 934 Clutch line.
A zero offset puts the mounting face on the wheel’s centerline, so the wheel sits evenly between the inner and outer sides of the hub. The 87 center bore centers the wheel on the hub, and the 5 backspacing describes how deep the rear of the wheel sits behind the mounting face.
Gloss black with milled areas is the finish named for this wheel. Milled areas are cut into the aluminum surface, which creates a contrast with the glossy black sections.
Key features
- 20-inch diameter and 9-inch width
- 6 on 135 bolt pattern
- Spoke design
- Gloss black and milled finish
- Aluminum construction
- Part of the 938 Enforcer series
- 0 offset, 87 center bore and 5 backspacing
Milled finish upkeep
Milled areas are cut into the aluminum, so dirt can settle in the recesses and show up more than on a smooth face. A soft brush and a mild wheel cleaner work well, followed by a rinse and a dry towel. Avoid abrasive pads, which can dull the glossy black areas over time. Milled faces also collect brake dust, so a quick wipe after rough trail use helps keep the contrast clear.
A zero offset puts the mounting face on the centerline, so the wheel sits evenly relative to the hub and the brake caliper. Before a trail trip, check the lug nuts and the wheel surface for scrapes, since rock contact is a common way gloss finishes get damaged. Replace any bent or cracked wheel rather than repairing it.
- Wipe milled areas after rough trail use
- Avoid abrasive pads on gloss black
- Check lug nuts before each trip
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW938M-29065-00 |
| Series | 938 Enforcer |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Spoke |
| Finish | Gloss Black and Milled |
| Construction | Aluminum |
Vehicle fitment
Universal Fit is the label here, and no vehicle is named. The 6 on 135 pattern and 87 center bore have to suit the hub, and the 0 offset and 5 backspacing have to clear the brakes and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pick lug hardware that suits the wheel’s seat type before mounting. Confirm the 6 on 135 pattern and 87 center bore against the hub before mounting.
What’s included
Plan for lug nuts, caps and valve stems to be separate purchases unless they arrive in your box.









