Overview
The FUEL Off-Road Rogue D709 is a 20×10 aluminum spoke wheel with a 6 on 135 bolt pattern, part number MHTD70920008947, in a matte black finish. It is aimed at trucks and SUVs with the 6 on 135 hub pattern, and its -18 offset pushes the mounting face toward the outer side of the wheel.
The D709 is one of FUEL Off-Road’s Rogue wheels, with a matte finish for owners who prefer a low-gloss appearance. Its 87 center bore must match the hub, and the 4.8 backspacing determines how far the wheel sits inside the fender.
Key features
- 20-inch diameter with a 10-inch wide rim
- 6 on 135 bolt pattern
- Matte black finish
- Spoke design in aluminum construction
- Offset -18, backspacing 4.8 and center bore 87
- Part of the FUEL Off-Road Rogue D709 line
Matte finish care
A matte finish looks clean when it is kept free of oils, road grime and brake dust. Use a pH-neutral wheel cleaner with a soft brush, then rinse thoroughly. Avoid polishes, waxes and abrasive pads, which can leave shiny patches that stand out against the flat surface. Brake dust tends to cling to spoke edges, so clean those areas more often than the face.
Trail use adds mud and grit that can work into the spoke joints and around the lip. Rinse the wheel after off-road runs and inspect the finish for chips that expose bare aluminum. A touch-up paint kit made for matte finishes can seal small chips, though a repaint may match better over larger areas. Check the mounting face during each tire rotation for corrosion or buildup that could affect seating.
- Clean with a pH-neutral cleaner and soft brush
- Skip waxes and abrasive pads on matte surfaces
- Inspect chips on spoke edges after trail use
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD70920008947 |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Offset | -18 |
| Backspacing | 4.8 |
| Center bore | 87 |
| Bolt pattern | 6 on 135 |
| Style | Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
The wheel is universal fit and is not built for one named vehicle. The 6 on 135 bolt pattern, 87 center bore and -18 offset decide fit for any truck or SUV, so match them to your hub before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 87 center bore against your hub before mounting, since a bore that does not match can cause vibration. Confirm the 6 on 135 pattern lines up with your wheel studs, then verify the -18 offset clears brake and suspension parts.
What’s included
Only the wheel is included; tires and mounting hardware come separately.
Not included: tires, lug nuts and center caps.











