Overview
The Prothane leaf spring eye bushing kit (part number D/I9-1003) is a red polyurethane kit for the front leaf spring eyes of the 1968–1971 International Scout. It is made for the Base trim.
The kit includes four poly bushings, two sleeves and a tube of super grease. The service is greaseable, so the included grease is the lubricant for these bushings.
Key features
- Four poly bushings
- Two sleeves
- Tube of super grease included
- Greaseable service type
- Front position
- Red finish
Greasing and bushing upkeep
Greaseable eye bushings need periodic lubrication to keep the leaf spring eye moving smoothly against the bushing and sleeve. On a Scout that sees dirt, water and sand, grease can wash out or pick up grit, which speeds up wear. Re-greasing during routine service keeps the joint quiet and reduces friction on the spring.
When assembling, wipe the sleeves clean and apply grease to the bushing bore before pressing it in place. Make sure the sleeves are seated square so the spring eye turns freely without binding. Old, cracked or deformed bushings should be replaced, and worn hardware should be checked at the same time.
- Grease at routine service intervals
- Clean grit from sleeves before reinstalling
- Inspect bushings for cracks and flattening
Specifications
| Brand | Prothane |
|---|---|
| Part number | D/I9-1003 |
| Position | Front |
| Color | Red |
| Material | Polyurethane |
| Service | Greaseable |
| Included | Four poly bushings, two sleeves, tube of super grease |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1968–1971 International Scout in the Base trim.
The list covers the Scout only. Other International models and other years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit is greaseable, use the tube of super grease included with it when assembling the eye bushings. Check the bushings and sleeves for fit before installing.
What’s included
Four poly bushings, two sleeves and a tube of super grease.









