Overview
The Prothane Steering Rack and Pinion Bushing Kit 18-701-BL (part number D/I18-701-BL) is a black polyurethane bushing kit for the steering rack on the 1995–2000 Toyota Tacoma. It covers the Base, Limited, Pre Runner and SR5 trims.
The polyurethane compound is built for durability and aims to deliver firm handling compared with rubber. The kit is a direct fit for the listed trims and falls under body lifts and bushings. Steering rack bushings hold the rack in position on the vehicle, and polyurethane is a common firmer alternative to rubber. Count and compare the pieces against the bushings you remove before installing.
Key features
- Steering rack and pinion bushing kit
- Polyurethane compound
- Black color
- Direct fit for the listed Toyota Tacoma trims
- Supplied as a kit in one box
Steering rack bushing wear
The steering rack is held in place by bushings that absorb movement from the road. As they wear, the rack can shift slightly, which often shows up as vague steering, wandering on the road or clunking over bumps. Worn rack bushings can also change how the steering responds at low speed, so inspect them whenever the front end is serviced.
Polyurethane bushings resist wear better than rubber but transmit more road vibration and can squeak without lubrication. Before replacing, check the steering rack mounts, tie rod ends and other front end parts, since worn parts often wear together. A wheel alignment is a good idea after the work is complete.
- Check for play at the rack mounts
- Look for cracked or flattened bushings
- Inspect tie rod ends during the same job
- Re-check fasteners after the first drives
Specifications
| Brand | Prothane |
|---|---|
| Part number | D/I18-701-BL |
| Product type | Steering rack and pinion bushing kit |
| Color | Black |
| Material | Polyurethane |
| Category | Body lifts and bushings |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 1995–2000 Toyota Tacoma in the Base, Limited, Pre Runner and SR5 trims.
Later Tacoma model years fall outside the 1995–2000 range, and other Toyota trucks are not covered. This kit is for the steering rack bushings only, not other suspension or steering bushings. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Steering components are safety-critical, so professional installation is the safest choice. Follow the vehicle service manual closely during the job.
Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and tighten all fasteners to the torque specifications for your vehicle.
After installation, have the steering and front end inspected, a wheel alignment performed, and re-check fastener tightness after the first miles of driving.
What’s included
A steering rack and pinion bushing kit in black. Count the pieces against the old bushings before installing.
Not included: Confirm the kit pieces against your installation before starting work.









