Overview
The Prothane D/I1-2002 (item 37257) is a red polyurethane complete bushing kit for the 1976–1979 Jeep CJ5 and CJ7. It is built to replace the worn rubber bushings across the body, springs, shackles, sway bar and steering linkage in one box.
Prothane says its polyurethane compound is durable enough for long service, and the kit is meant to give maximum performance and handling from the same set.
Key features
- Red polyurethane construction
- Body mounts, spring and shackle bushings front and rear
- Sway bar bushings and sway bar end links
- Tie rod boots and a torque arm bushing
Before you install
Polyurethane bushings differ from rubber in how they feel and sound. They are firmer, so the ride can feel more direct over broken pavement, and some owners notice more squeak or vibration through the body if the bushings are not kept clean and lubricated. Rubber absorbs more movement, so a polyurethane refresh is often most noticeable on the road. Keep a supply of lubricant for the joints that call for it, and wipe away grit that collects at the sway bar and shackle ends.
Old rubber bushings are often not the only worn parts on a CJ. Spring shackles, tie rod ends and steering pivots take the same loads, so inspect them while the bushings are out. Replacing the sway bar end links and torque arm bushing in the same session saves a second trip under the vehicle.
- Check the frame mounts for rust before fitting new body mounts
- Look for cracked tie rod boots after the first few drives
- Torque fasteners once the vehicle is back on its wheels
Specifications
| Brand | Prothane |
|---|---|
| Part number | D/I1-2002 |
| Item number | 37257 |
| Type | Complete bushing kit |
| Color | Red |
| Material | Polyurethane |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1979 Jeep CJ5 and the 1976–1979 Jeep CJ7, including the Base, Golden Eagle and Renegade trims.
The list does not cover the CJ5 or CJ7 from 1975 or from 1980 onward. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Body mounts, spring and shackle bushings for the front and rear, sway bar bushings, sway bar end links, tie rod boots and a torque arm.









