Overview
The Icon Suspension 57801P is a front shock from Icon’s V.S. 2.5 Series, sold as a set of two, for the 1991 to 1997 Toyota Land Cruiser 80 Series in the Base trim. It is designed for 0 to 3 inch of lift and is configured for this application in both length and damping.
Each shock uses a remote reservoir to help heat leave the damping oil during sustained use. A 6061 billet aluminum manifold sits near the top cap and feeds the internal Bump Zone, which adds 20% damping as the shock approaches full compression. The body components are CNC machined from 6061 aircraft grade aluminum.
Key features
- Remote reservoir design to help heat leave the shock during long off-road use.
- Internal Bump Zone that adds 20% damping as the shock nears full compression.
- One piece digressive piston with valving tuned for this application.
- 7/8 inch induction hardened, chrome plated shock shaft.
- PTFE lined spherical bearings with application specific mounting hardware.
- Polyurethane bushings and forged steel mounting stems for OE factory type fitment.
- Fully rebuildable and revalveable.
Front shock upkeep
Front shocks absorb steering input, braking dive and bumps from the road, and they sit in a spot that gets splashed with water and grit. Over time the spherical bearings and bushings lose their fit, which can make the front end feel loose even when the shock body is sound. Regular checks help separate a shock problem from a joint problem.
Because the shocks are sold as a pair, look at both sides together. Compare the shaft condition, body and mounts on each side, and check for oil streaks or uneven wear on the coil spring seats. A rebuildable and revalveable design gives the option of service when the seals or valving wear, rather than full replacement.
- Check for oil streaks on the shaft and body
- Test bearings and bushings for play
- Compare both sides for even wear
- Inspect coil spring seats for damage
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 57801P |
| UPC | 70000750447 |
| Product line | V.S. 2.5 Series |
| Position | Front |
| Quantity | Sold as a set |
| Lift range | 0 to 3 inch |
| Shock shaft | 7/8 inch diameter, induction hardened, chrome plated |
| Body | 6061 aircraft grade aluminum, CNC machined components |
| Bearings | PTFE lined spherical |
| Bushings and stems | Polyurethane bushings, forged steel mounting stems |
| Rebuildable and revalveable | Yes |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1991–1997 Toyota Land Cruiser in the Base trim. The product is a direct fit front shock for that listing, and the stated lift range is 0 to 3 inch.
The list does not cover other Land Cruiser generations, the 4Runner or the Tacoma. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shocks are sold as a set, replace both fronts together so damping stays even from side to side. Measure your current front lift against the 0 to 3 inch range before ordering. Front suspension work should be done with the vehicle safely supported, and coil springs handled with care.
What’s included
Sold as a set of two front shocks. Application specific mounting hardware is part of the design, so check the package contents against your installation before starting.