Overview
The Fox Racing Shox Fox 2.0 Performance Series coil-over IFP shock, part number 985-02-016, is a front direct replacement shock for the 2008–2011 and 2013–2016 Toyota Land Cruiser Base. It is sold as a bolt-on replacement, so installation centers on swapping the original unit for this one.
Fox says each direct replacement application was tested by its engineers to maximize suspension travel and performance on and off the road. The title identifies this shock as an internal floating piston (IFP) design with a coil-over setup, and the body is aluminum with a 0 to 2 in. lift rating.
Key features
- Direct replacement, bolt-on design
- Coil-over IFP construction
- Aluminum shock body
- Front mounting position
- Lift height rating of 0 to 2 in.
- The direct replacement line covers hundreds of applications, from stock to lifted vehicles.
Coil-over spring care
A coil-over shock places the spring around the damper body, so spring preload and shock damping work together. When the shock is removed, the spring must be released safely before any bolts come out. Use the right spring compressor and keep hands and tools clear of the coil while the load comes off.
Inspect the spring for cracks, flat spots or rust, and check the spring seats and bushings. Coil-over setups are often replaced in matched sets so both sides ride at the same height. After installing, recheck the spring seat and fasteners after the first few drives.
- Use a proper spring compressor
- Check spring seats for wear
- Replace springs in matched pairs when worn
- Recheck fasteners after the first drives
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-02-016 |
| UPC | 700007005071 |
| Series | Fox 2.0 Performance Series |
| Type | Coil-over IFP shock |
| Body material | Aluminum |
| Mounting position | Front |
| Fitment type | Direct fit |
| Lift height rating | 0 to 2 in. lift |
Vehicle fitment
The manufacturer fitment list names the 2008–2011 and 2013–2016 Toyota Land Cruiser, Base trim only.
Model years between those ranges, other Land Cruiser generations and trims beyond Base are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a direct replacement, the original shock comes off at its existing mounts and this unit goes on in the same positions. Coil-over shocks carry spring load, so release or compress the spring with the proper tool and support the vehicle on stands before removing the original shock.
What’s included
The product is one coil-over IFP shock under part number 985-02-016.
Not included: This package is one shock. Check the package contents against your installation before starting.







