Overview
The Icon 78703 is a torsion relocation system for heavy-duty GM pickups. It fits the 2011-2015 Chevrolet Silverado 2500 HD and 3500 HD and the 2011-2015 GMC Sierra 2500 HD and 3500 HD.
The torsion relocation system lets the factory torsion bar stay in its factory location, which Icon says gives the center of the vehicle maximum ground clearance. It is part of Icon lift kits K78301, K78302 and K78303.
Key features
- Factory torsion bar stays in its factory location
- Designed to maximize ground clearance at the center of the vehicle
- Requires stock torsion keys
- Part of Icon lift kits K78301, K78302 and K78303
Torsion bar relocation basics
A torsion bar carries the front suspension load by twisting along its length. Relocating it moves the anchor point so the bar can clear the frame and the lift components. Because the bar’s preload and height settings are tied to its position, the arm and keys must be handled with care during the move.
Keep the removal process controlled. Support the front end securely, mark the factory positions, and inspect the arm and keys for wear before reinstalling. Ride height, steering geometry and front alignment are all affected by a relocation, so schedule an alignment and recheck the bar’s torque once the truck has been driven a short distance.
- Mark factory torsion bar and key positions
- Support the front end before removing the arm
- Inspect keys and arms for wear
- Recheck fasteners after the first drives
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 78703 |
| UPC | 70000636953 |
| Component | Torsion relocation system |
| Torsion keys | Stock torsion keys required |
| Related lift kits | K78301, K78302, K78303 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011-2015 Chevrolet Silverado 2500 HD and 3500 HD (High Country, LT, LTZ, WT) and the 2011-2015 GMC Sierra 2500 HD and 3500 HD (Base, Denali, SLE, SLT, WT).
Model years from 2016 onward and Silverado or Sierra 1500 models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Stock torsion keys are required, so keep the factory keys for this install. Have the alignment checked after the front end is lifted and reassembled.
What’s included
Check the package contents against your installation before starting.
Not included: Stock torsion keys, which must be used with this system.







