Overview
The Pro Runner monotube shock absorber from Pro Comp Suspension is a 2.75 coilover bypass shock in the Black Series. Its main design point is a long travel system.
This shock is a monotube coilover bypass design with a long travel system. Confirm its length, mounting and coilover setup for your vehicle before ordering.
Key features
- Monotube shock absorber design
- 2.75 coilover bypass shock
- Black Series
- Long travel system
Choosing a coilover bypass shock
A bypass coilover shock works alongside a separately mounted spring, so the shock and spring are usually chosen as a matched pair. Its design suits builds where the shock and spring are sized together, and the choice of length and mounting decides whether the setup works. Long travel systems are used when the wheel needs to move farther through its range on rough ground.
Before buying a bypass shock, measure the travel you expect on your build and the space the shock has. Compare mounting hardware, bushings and bump stops, since these are often replaced with the shock. Keep the shaft clean, and inspect the seals after trail runs to catch leaks early.
- Measure fully extended and compressed lengths
- Replace bushings and hardware with the shock
- Check seals after hard trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| UPC | 614901231687 |
| Design | Monotube, coilover bypass |
| Series | Black Series |
| Travel | Long travel system |
Vehicle fitment
Confirm the shock’s length, mounting and coilover setup for your vehicle before ordering.
A visual match is not enough. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Pro Runner monotube shock absorber.









