Overview
The Pro Comp transmission drop bracket, part number 90-5146B, lowers the transmission on a lifted Dodge Ram to correct driveline angles. It is a direct fit bracket for the 2003 to 2005 Dodge Ram 2500 and Ram 3500.
A lifted Ram can have its driveshaft angles pushed out of range when the transmission stays in its factory location. This bracket makes the lowering operation a straightforward task. The UPC for this part is 614901119107.
Key features
- Lowers the transmission to correct driveline angles
- Direct fit design for Ram 2500 and 3500
- Fits 2003 to 2005 model years
Shifter and linkage after a drop
A lowered transmission moves the shifter base and the linkage rods, so throw and reach can change. Check that the shifter returns to neutral cleanly and that every gear selects without binding. Rods that are bent or worn at the pivots can make a correct installation feel sloppy, so inspect the bushings as part of the job.
The transmission mount and the crossmember bear the weight of the drivetrain, and the bracket changes how that load sits. Check the bolts and mount surfaces for cracks before driving. Mount bushings and linkage bushings are often replaced in the same job, since they are easier to reach while the transmission is already lowered.
- Check the shifter returns to neutral
- Inspect linkage bushings for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 90-5146B |
| UPC | 614901119107 |
| Type | Transmission drop bracket |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2003 to 2005 Dodge Ram 2500 and the 2003 to 2005 Dodge Ram 3500 across the trim levels of those years. Confirm the model and year before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the transmission before the stock mount is removed. After the bracket is installed, check the driveline angles and the transmission’s position before driving.
What’s included
Verify the parts received match the installation steps before starting.






