Overview
The Pro Comp transmission drop bracket, part number 57091B, lowers the transmission on a lifted truck to correct driveline angles. It is a direct fit bracket for the 2005 to 2011 Toyota Tacoma.
When a truck is lifted, the transmission can sit high enough to push the driveshaft angles out of range. The bracket lowers the transmission to restore those angles, which makes the correction a simpler job. The UPC for this part is 614901129151.
Key features
- Lowers the transmission to correct driveline angles
- Direct fit design
- Fits 2005 to 2011 Toyota Tacoma models
Checking the mount after a drop
Dropping a transmission changes the spacing between it and the transfer case or the rear crossmember, which is why the mounts and crossmember bolts should be checked after the job. The new position also changes shifter reach, so test each gear with the engine off first and then while idling. A lower transmission can also get closer to rocks and debris, so take care on steep trails.
Driveline vibration often traces back to a change in angle, but worn U-joints and a damaged slip joint can produce the same symptoms. Measure the angles with a level or inclinometer and compare the readings before and after the drop. Keeping a written record of the readings makes future service start from known figures.
- Test every gear with the engine off before driving
- Re-check mount bolts after the first short drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57091B |
| UPC | 614901129151 |
| Type | Transmission drop bracket |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005 to 2011 Toyota Tacoma across the trim levels of those model years. The Tacoma’s transmission mount location is what the bracket relies on, so confirm the year and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the transmission before removing the factory mount, and check the driveline angles after the bracket is installed. Recheck the transmission cross member and mounting bolts once the truck has been driven a short distance.
What’s included
Confirm the kit contents match your installation before starting.





