Overview
The Pro Comp EXP226000 is a single steering stabilizer cylinder from the ES2000 series. The ES2000 stabilizer is engineered to improve handling and reduce wheel vibration, which can limit wear on suspension components.
A steering stabilizer is a damper that sits between the axle and the steering linkage. It limits side-to-side steering movement when the wheels meet obstacles, which is a main cause of bump steer. Oversized tires and rough roads can make bump steer worse, and a stabilizer helps reduce it.
Pro Comp marks the fitment as universal, but a steering stabilizer has to match the steering linkage and mounting points of the truck it goes on. Confirm the fit against your vehicle’s steering setup before ordering.
Key features
- ES2000 series single steering stabilizer cylinder
- ES2000 series single steering stabilizer cylinder that reduces wheel vibration and bump steer.
- Single cylinder configuration
- Brackets and shock boot are not included
- Part number EXP226000
Matching a stabilizer to the steering
A steering stabilizer works as a damper in the steering system, and its job is to slow sudden side-to-side movement of the axle. It is most useful on trucks with larger tires, a lift or a worn steering linkage, where bump steer and wheel shimmy are more likely. The stabilizer helps keep the steering steady, but it does not replace worn tie rods or ball joints.
Match the cylinder’s stroke and mounting points to the steering layout before installation. A stabilizer that is too long or too short will bind at full lock, which is why the stroke should be checked against the steering movement. Keep the mounts tight and inspect the cylinder seals on a regular basis.
- Inspect tie rod ends for play
- Check mounting bolts for proper torque
- Look for fluid leaking from the cylinder seals
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP226000 |
| Product type | Steering stabilizer cylinder, single |
| Series | ES2000 |
| Brackets included | No |
| Shock boot included | No |
Vehicle fitment
No specific vehicle is named for this steering stabilizer cylinder. Confirm the fit against your truck’s year, model and steering setup before ordering.
Because a steering stabilizer connects to the steering linkage, check the mounting points and the bracket fit on your vehicle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because brackets are not included, the mounting points on the axle and the steering linkage must be matched before the cylinder is installed. Check the stroke against the steering movement so the stabilizer does not bind at full lock.
What’s included
The single steering stabilizer cylinder is the part described. Brackets and the shock boot are not included, and the shock boot is sold separately.
Not included: brackets and the shock boot.
















