Overview
The ARB Surface Mount Outlet (Black), part number 10900028, is a threaded socket supplied with an ARB surface mount housing. It pairs with the ARB Fridge Freezer DC cord, part number ARB10910076, and is a universal fit item.
The housing has wire entry cut-outs in three locations, an O-ring seal to reduce the chance of water ingress, and a vent path that lets air move through the housing to reduce condensation.
Key features
- Threaded socket supplied with the housing
- O-ring seal to reduce chance of water ingress
- Wire entry cut-outs in three locations
- Vent path to reduce condensation inside the housing
Wiring and mounting considerations
An outlet in a fridge circuit is only as reliable as its wiring. Use cable sized for the fridge load and protect the circuit with a fuse or breaker placed close to the power source. Take care with routing so the cable runs away from moving parts, heat sources and sharp edges.
Seal every cable entry point. The O-ring on the housing helps keep water out, but the cable gland or grommet at each wire opening needs to be snug and undamaged. Where the housing sits in a wet area, such as a wheel well or outdoor locker, check the seal after washing the vehicle or driving through water.
Before drilling or cutting, confirm that the mounting spot has clearance behind it and that no wiring, fuel lines or brake lines run through the area. Protect the socket from dust and moisture when it is not in use.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 10900028 |
| UPC | 9332018022240 |
| Color | Black |
| Category | Cooler / fridge accessory (electrical outlet) |
| Mounting | Two molded screw holes in the housing (screws not supplied), or the socket removed and mounted directly |
Vehicle fitment
It is meant to pair with the ARB Fridge Freezer DC cord rather than a particular vehicle. It is a universal fit item.
Confirm the wiring and mounting location against your vehicle and fridge setup before installing.
Installation notes
Fix the surface mount housing through its two molded mounting screw holes, using screws suited to your surface, since screws are not supplied. Alternatively, remove the socket from the housing and panel and mount it in the vehicle. Take care to insulate the terminals when mounting the socket directly.
What’s included
The threaded socket and its ARB surface mount housing.
Not included: mounting screws, which are not supplied due to variation in surface requirements. The ARB Fridge Freezer DC cord (P/N ARB10910076) is a separate partner part.









