Overview
The Pro Comp Pro Runner ZX2032 is a front gas-charged monotube shock absorber with loop-style upper and lower mounts. It is designed for a 6 inch lift and fits the 2005 to 2016 Ford F-250 and F-350 Super Duty. It measures 25.83 inches extended, 16.32 inches collapsed and 9.51 inches of travel.
Pro Comp built this shock for late-model trucks, Jeeps and SUVs, with vehicle-specific ride tuning developed through dyno testing and real-world use. The zinc plated, clear coated monotube body holds a nitrogen charge, which reduces cavitation and helps the shock shed heat.
In a monotube shock, the damping oil and the gas share one tube, with a piston keeping them apart. That layout is different from a twin-tube design, which uses an inner and an outer tube.
Confirm the 6 inch lift on your truck and the loop mount pattern on both ends before fitting. The boot is included, and the table below gives the extended, collapsed and travel lengths.
Key features
- Front placement for a 6 inch lift
- Loop upper and lower mounts
- Multi-stage valving
- Nitrogen charged with a zinc plated finish
- Boot included
Front shock wear signs
A front shock does a lot of work on rough roads and under braking, so wear shows up quickly at the front end. Early signs include a bouncy feel after dips, a nose that dives hard when braking and a steering wheel that feels less stable on uneven pavement.
Front shocks also carry the load of a heavy front end on a Super Duty. When a shock loses damping, the front tires can cup, and the suspension may travel faster than it should over bumps. Checking the body for oil and the boot for splits gives an early indication of when a replacement is due.
- Look for oil on the shock body
- Check the boot for splits or tears
- Watch for cupped front tire wear
- Feel for a bouncy front end after dips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2032 |
| UPC | 614901024357 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 6 in. |
| Extended length | 25.83 in. |
| Collapsed length | 16.32 in. |
| Travel | 9.51 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It fits the 2005–2016 Ford F-250 Super Duty and the 2005–2016 Ford F-350 Super Duty.
Super Duty model years outside 2005–2016, and F-150 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 6 inch lift on your truck and the loop mount pattern on both ends before fitting this front shock.
What’s included
One front monotube shock, with its boot.




























