Overview
The Pro Comp DC400 is a drop pitman arm for power steering that fits the 2003-2008 Dodge Ram 2500 and Ram 3500. It installs in the front position.
The drop lowers the drag link attachment, which reduces link angle on a lifted truck. It is a steering correction part.
The drop is either 3 inches or 4 inches, so confirm the exact figure before ordering if it matters for your setup.
Dodge Ram 2500 and 3500 trucks of this generation have a long drag link, so the angle changes noticeably after a lift.
Ram 2500 and 3500 trucks have a long drag link running across the front axle, so lifting changes the link angle. A drop arm brings it back toward level.
The two drop figures come from different parts of Pro Comp’s own data.
Key features
- Drop pitman arm for lifted Ram trucks
- Reduces drag link angle
- Steering correction
- Power steering
- Front position
- Drop given as 3 inches or 4 in. by Pro Comp
Drag link angle on lifted Rams
On a Ram 2500 or 3500 with a lift, the long drag link runs across the front axle at a steeper angle, and the steering can wander or develop bump steer as a result. A drop pitman arm moves the drag link attachment lower so the link sits closer to parallel with the axle. This works best alongside other correction, such as track bar and control arm adjustments.
When installing, check the drag link end for wear before reusing the nut and clip, and confirm the steering box is centered before torquing the pitman nut. After installation, check clearance at full lock and look for contact between the link and the frame or steering components. A wheel alignment afterward helps keep toe and tire wear in check.
- Inspect the drag link ends for play
- Recheck the pitman nut torque after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | DC400 |
| UPC | 614901005653 |
| Product type | Drop pitman arm |
| Amount of drop | 3 inches in specs; 4 in. in description |
| Position | Front |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp Suspension DC400 includes: 2003–2008 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4); 2003–2008 Dodge Ram 3500 (Laramie, SLT, ST, SXT, Sport, TRX4).
It fits 2003-2008 Dodge Ram 2500 and 3500 trucks, including the Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX4 trims on the 2500 and the Laramie, SLT, ST, SXT, Sport and TRX4 trims on the 3500. The 2009-2010 Rams and Ford Super Duty trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the drag link end from the old arm, then pull the arm with a puller. With the steering box centered, fit the replacement and tighten the nut. Check clearance at full lock, since a drop arm moves the link end lower.
What’s included
- One pitman arm, part number DC400








