Overview
The Pro Comp Suspension YJ400 is a dropped pitman arm for the 1987–1995 Jeep Wrangler (YJ), the 1997–2006 Wrangler (TJ) and the 2004–2006 Wrangler Unlimited (LJ), with a 4 inch drop for front power steering.
A pitman arm is the lever that connects the steering box to the drag link. Pro Comp says its dropped version is required on TJ Wranglers running a (4) suspension lift, because a lift creates new and increased steering angles that the factory arm cannot absorb. The feature list names three benefits: it eliminates bump steer, restores turning radius and prevents frame damage. The YJ400 suits Wrangler owners who have added suspension lift and want the steering linkage brought back to a workable angle.
Key features
- Dropped pitman arm with a 4 inch amount of drop
- Front position, made for power steering
- Direct fit for the YJ, TJ and LJ Wrangler
- Designed to reduce bump steer.
- Helps restore turning radius
- Helps prevent frame damage.
- Dropped version needed on TJ Wranglers with a (4) suspension lift
Steering angles after a lift
The pitman arm sits between the steering box and the drag link, so changes in suspension height change how it moves. When the angles grow too steep, the linkage can bind, cause bump steer and wear parts faster. A dropped arm changes that angle so the linkage can work closer to its designed range, which matters most on power steering vehicles.
Look over the steering box mounts, drag link ends and the pitman arm nut and taper after installation. Loose parts can make a new arm feel like it has failed, so tighten and check everything before the first drive. Checking for play at the steering wheel while the engine runs helps catch problems early. Frame and crossmember areas near the steering box should also be inspected for cracks after heavy use.
- Check the pitman arm nut and taper after installation
- Recheck steering box mounts after the first drives
- Watch for wander or steering play on the highway
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | YJ400 |
| UPC | 614901110074 |
| Product type | Dropped pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
| Vehicle coverage | Jeep Wrangler YJ, TJ and LJ |
Vehicle fitment
It fits three Wrangler generations: the YJ, the TJ and the long-wheelbase LJ Unlimited. Trim details for each generation follow.
- 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon)
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
- 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport)
The three Wrangler generations above are the only ones named. The 2007 and newer Wrangler (JK) is not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct fit, meant to replace the factory arm on the steering box without modification. Follow the installation steps included with the arm, and have the finished job and the lifted steering checked by a qualified technician.
What’s included
The YJ400 is a single dropped pitman arm. Check the package contents against your installation before starting.









