Overview
The Pro Comp FD700 is a 4 inch drop pitman arm for power steering on 2005-2010 Ford F-250 Super Duty and F-350 Super Duty trucks. It mounts at the front.
When a Super Duty is lifted, the drag link attachment point needs to move down to reduce link angle. The FD700 is built for that job on this generation of Super Duty.
The part follows the Super Duty body style that began in 2005, with later model years served by a different arm.
The 2005 Super Duty redesign changed the front end, which is why this arm starts at that year.
The F-250 and F-350 Super Duty share a front end in these years, so one arm fits both trucks. The drop is 4 inches, measured as how far the link end moves down.
Owners adding a lift kit to a 2005-2010 Super Duty can use it to restore link angle.
Key features
- 4 inch drop pitman arm
- Super Duty application
- Power steering
- Front position
- Direct fit
Super Duty steering after lifting
Lifting a Super Duty changes the steering geometry at the front, and the drag link angle is usually the first thing to change. A drop pitman arm moves the attachment point down to reduce that angle and bring the steering back into line. Because this is a steering part, it works best with a sound front end and a correct alignment. Heavy tires and bumpers add load to the steering, so check the stabilizer mounts too.
Look at the tie rod ends, the drag link and the steering stabilizer before installing a drop arm, since worn joints can make the new setup feel loose. Keep the steering box centered when tightening the nut, then verify full turn clearance against the frame and linkage. Recheck the steering after the first highway run, paying attention to wander or shake.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | FD700 |
| UPC | 614901110418 |
| Product type | Drop pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp Suspension FD700 includes: 2005–2010 Ford F-250 Super Duty (Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT); 2005–2010 Ford F-350 Super Duty (Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT).
It fits 2005-2010 F-250 and F-350 Super Duty trucks. Confirm fit for your year, model and trim before ordering.
Installation notes
Release the drag link end from the old arm, then pull the arm with a puller. Install the FD700 with the steering box centered, tighten the nut and check clearance through full steering lock.
What’s included
- One pitman arm, part number FD700








