Overview
The Fabtech FTS93001 is a 4 inch dropped pitman arm for the 2003–2005 Dodge Ram 2500 and Ram 3500 with power steering.
Fabtech says dropped pitman arms are required in many of its kits to correct steering geometry after a suspension system has been installed, and that it manufactures them stronger than stock units using forging and CNC machining.
This version suits heavy-duty Ram owners who have lifted the truck and need the front steering linkage to sit at a better angle. The 4 inch drop is carried in the front position.
This 4 inch dropped pitman arm suits 2003–2005 Dodge Ram 2500 and Ram 3500 trucks with power steering. A dropped pitman arm corrects the steering geometry of a lifted truck, and this one provides the 4 inch drop in the front position.
Owners comparing arms for other Ram years should note that Fabtech uses separate part numbers for other model years, so the FTS93001 should not be assumed to fit outside 2003–2005.
Key features
- 4 inch amount of drop
- Front position
- For power steering
- Direct fit
- Covers 2003–2005 Ram 2500 and 3500
- Forged and CNC machined
- It is forged and CNC machined, and it is built stronger than a stock arm.
Steering after a lift
A lifted truck changes the angle of the front steering linkage, and that change shows up as bump steer, wander or a tight feel at full lock. A dropped pitman arm moves the drag link to a better angle, so steering geometry can return closer to what the suspension was designed for. Because steering affects every turn, a steering check after the work is part of the install.
The pitman arm links the steering gear to the drag link, so worn or loose parts elsewhere in the system can mimic arm problems. Inspect the tie rods, ball joints, drag link and steering box for play before installing a new arm. Check the arm for cracks at the taper and replace it if movement shows at the joint.
- Look for play at the taper and nut
- Check that the steering wheel returns to center
- Recheck nut torque after the first drive
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS93001 |
| UPC | 674866015999 |
| Product type | Pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
Vehicle fitment
It fits the Ram 2500 and Ram 3500 across the 2003–2005 model years, in Laramie, SLT and ST trims.
- 2003–2005 Dodge Ram 2500 (Laramie, SLT, ST)
- 2003–2005 Dodge Ram 3500 (Laramie, SLT, ST)
Ram 1500 and 2006 and newer 2500 and 3500 trucks are outside this fit. Match the year, model and trim of your truck before buying.
Installation notes
It is a direct fit that replaces the factory arm. Check the torque for each fastener before final tightening, and have a qualified technician verify the steering afterward.
What’s included
One pitman arm is included. Check the hardware against your installation before starting.







