Overview
The Pro Comp Nitro 65205K is a leveling lift kit with 3 inches of front lift and 1 inch of rear lift. The front uses strut spacers, and the rear uses lift blocks with U-bolts. The maximum tire size is 32×11.50, and the kit suits wheels 16 inches and larger, 8 to 9 inches wide, with 4 to 5 inches of backspacing.
Pro Comp designs its Nitro kits as an economical alternative to a complete suspension system. The design keeps the factory steering geometry intact, which helps preserve ride quality and handling. All necessary hardware and instructions come with the kit. Replacement front and rear shocks are recommended, and a wheel alignment is needed after installation.
Key features
- 3 inches of front lift
- 1 inch of rear lift
- Front strut spacers
- Rear lift blocks with U-bolts
- Longer shocks recommended
- Maximum tire size 32×11.50
Shocks and the new ride height
Raising a truck with a front strut spacer and a rear lift block changes the working length of both shocks. Factory shocks may run out of travel at the new height, which can affect control over bumps and under braking. Matching shocks are a practical part of the setup rather than an optional extra.
U-bolts on rear lift blocks can settle after the first drives, so check their torque and look for shifting. Brake lines and sway bar links should be checked for length and stretch at the new height. Wheel alignment should be set once the kit is installed, and rechecked if the tires wear unevenly.
- Replace shocks along with the lift
- Check brake line length after installing
- Retorque lift block U-bolts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 65205K |
| UPC | 614901022285 |
| Type | Nitro leveling lift kit |
| Front lift height | 3 inches |
| Rear lift height | 1 inch |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks with U-bolts |
| Maximum tire size | 32×11.50 |
| Wheel diameter | 16 inches and larger |
| Wheel width | 8 to 9 inches |
| Wheel backspacing | 4 to 5 inches |
| Finish | Black |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check that your wheels match the size and backspacing noted above.
Check Pro Comp’s application list for your vehicle’s year, model and trim before ordering, and confirm the wheel size and backspacing.
Installation notes
Set the alignment after the kit is installed. Pro Comp recommends replacement front and rear shocks with this kit, so check the shock lengths against the new ride height.
What’s included
Strut spacers, rear lift blocks with U-bolts, all necessary hardware and instructions.









