Overview
The Pro Comp Nitro 62688K is a 3.5-inch leveling lift kit with 3.5 inches of front lift and 3 inches of rear lift. The front uses coil spring spacers, and the rear uses lift blocks with U-bolts. The kit is for 4WD models with a maximum tire size of 37 inches.
The kit fits the 2008 to 2010 Ford F-250 Super Duty and F-350 Super Duty in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. The Nitro kits are an economical alternative to a complete suspension system. The factory steering geometry is kept, which helps preserve ride quality and handling. The track bar drop bracket is included.
Key features
- 3.5 inches of front lift
- 3 inches of rear lift
- Front coil spring spacers
- Rear lift blocks with U-bolts
- Track bar drop bracket included
- Maximum tire size of 37 inches
Steering and driveline at higher lift
A larger lift increases the angle of the front and rear driveline components. CV joints and axle angles are most affected, and vibration at speed is often the first sign of a problem. Check the driveline after installation and look for clicking when turning, which can point to a worn CV joint. Some owners add a longer driveshaft or a slip yoke for larger lifts, so ask whether the setup needs one before the lift goes in.
The track bar and steering linkage are affected by the drop bracket, so the steering should be checked for wander or play after installation. Brake lines and ABS wiring may need more slack when the front is raised, and they should be inspected for stretching and rubbing. Keep the setup balanced between front and rear so the truck does not sit at an odd angle.
- Check CV joints for clicking or torn boots
- Confirm steering centers after alignment
- Inspect brake lines and ABS wiring
- Consider a longer driveshaft for larger lifts
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 62688K |
| UPC | 614901022827 |
| Type | Nitro leveling lift kit |
| Front lift height | 3.5 inches |
| Rear lift height | 3 inches |
| Front lift method | Coil spring spacers |
| Rear lift method | Lift blocks with U-bolts |
| Maximum tire size | 37 inches |
| Spacer material | Steel |
| Finish | Black |
| Drivetrain | 4WD models |
Vehicle fitment
The 2008 to 2010 Super Duty trucks covered are the F-250 and F-350 in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The kit is for 4WD models. Other model years and the F-150 are not on this list. Confirm your vehicle’s year, model, drivetrain and trim before ordering.
Installation notes
Align the wheels after the kit is installed. The track bar drop bracket is part of the setup, so review the instructions for the track bar before you start.
What’s included
Coil spring spacers, lift blocks with U-bolts, the track bar drop bracket, all necessary hardware and instructions.







