Overview
The Pro Comp Nitro 65660K is a leveling lift kit with 2.75 inches of front lift and 1.75 inches of rear lift. The front uses strut spacers, and the rear uses an Add-A-Leaf. The maximum tire size is 31 inches, and all hardware and instructions are included.
The kit is an economical alternative to a complete suspension system and keeps the factory steering geometry intact. A rear shock matched to the new height suits this kit, and a wheel alignment is required after installation.
The Add-A-Leaf at the rear adds one leaf to the rear leaf pack to raise the back of the truck to match the front. Strut spacers at the front keep the factory steering geometry, which helps preserve handling and ride quality. Check the rear ride height after installation.
Key features
- 2.75 inches of front lift
- 1.75 inches of rear lift
- Front strut spacers
- Rear Add-A-Leaf
- Maximum tire size 31 inches
- Longer shocks recommended
Add-A-Leaf and rear load
An Add-A-Leaf works by adding a short leaf to the top of the rear leaf pack. The extra leaf stiffens the spring and lifts the rear, which can make an unloaded truck ride firmer. It suits a truck that sits low in back, but it does not replace a full rear spring set.
The stiffer rear can change how the truck handles on bumps and under load, so test drive with and without cargo. Check the U-bolts, the spring clamp and the shock mounts after installation. Leaf packs often settle over time, so recheck rear height after a few weeks of use. Front strut spacers should be paired with an alignment check to keep tire wear even.
- Check U-bolts and spring clamps
- Recheck rear height after settling
- Test drive loaded and unloaded
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 65660K |
| UPC | 614901022421 |
| Type | Nitro leveling lift kit |
| Front lift height | 2.75 inches |
| Rear lift height | 1.75 inches |
| Front lift method | Strut spacers |
| Rear lift method | Add-A-Leaf |
| Maximum tire size | 31 inches |
| Spacer material | Steel |
| Finish | Black |
Vehicle fitment
Match your vehicle’s year, model and trim before placing the order.
Check Pro Comp’s application list for your vehicle’s year, model and trim before ordering.
Installation notes
Check the alignment after the new ride height is set. The rear Add-A-Leaf changes the rear spring rate, so check the rear ride height after the kit is installed.









